I just got laid..
Registered User
Joined: Feb 2009
Posts: 301
From: frankfurt
Re: I just got laid..
nope thats not normal, at least it didnt happen to me ... it should be 3xquicker than win xp ... google your issue up, ubuntu has a huge community you should find it
Zippy Tie Rider
Joined: Mar 2009
Posts: 3,408
From: Florida
Re: I just got laid..
God damn I need some tools. Couple questions here... what socket size are cage bolts because everyone I have it too small to fit them, do I need an oil filter wrench to get that ****** off, because I can't find mine, and what are some other sizes I should have.
My bdays coming up in a couple of weeks so I'm gonna ask shorty to pick me **** up for my bday from Sears. I'm trying to compile a list of everything I might need to fix the f4i as I constantly break it.
So far I need:
hex driver set
breaker bar
27mm socket
22mm socket
12" adjustable wrench
Any idea on what kind of saw to get to cut the 12 bar / tubing?
My bdays coming up in a couple of weeks so I'm gonna ask shorty to pick me **** up for my bday from Sears. I'm trying to compile a list of everything I might need to fix the f4i as I constantly break it.
So far I need:
hex driver set
breaker bar
27mm socket
22mm socket
12" adjustable wrench
Any idea on what kind of saw to get to cut the 12 bar / tubing?
bp chaser
Joined: Oct 2002
Posts: 85,659
From: LI, NY and I drive in Australia
Re: I just got laid..
God damn I need some tools. Couple questions here... what socket size are cage bolts because everyone I have it too small to fit them, do I need an oil filter wrench to get that ****** off, because I can't find mine, and what are some other sizes I should have.
My bdays coming up in a couple of weeks so I'm gonna ask shorty to pick me **** up for my bday from Sears. I'm trying to compile a list of everything I might need to fix the f4i as I constantly break it.
So far I need:
hex driver set
breaker bar
27mm socket
22mm socket
12" adjustable wrench
Any idea on what kind of saw to get to cut the 12 bar / tubing?
My bdays coming up in a couple of weeks so I'm gonna ask shorty to pick me **** up for my bday from Sears. I'm trying to compile a list of everything I might need to fix the f4i as I constantly break it.
So far I need:
hex driver set
breaker bar
27mm socket
22mm socket
12" adjustable wrench
Any idea on what kind of saw to get to cut the 12 bar / tubing?
common metric sockets. 8, 10, 12, 14. Deep sockets are better than shallow sockets.
metric hex bit set
at least 1 extender, but 2 or 3 would be better, you might need more than one to put the cage on.
a 10" or 12" ratchet
the 22 and 27 will only come with a 1/2" drive, which is good. Get a big breaker bar, like 18" or so, you dont really need a 1/2" drive ratchet but theyre good to have anyway.
also, definitely get a set of metric box wrenches, aka open end wrenches
you could get one set with everything listed but the majority of the tools in it wont be metric. if all you ever work on is japanese bikes then all you need is metric
bp chaser
Joined: Oct 2002
Posts: 85,659
From: LI, NY and I drive in Australia
Re: I just got laid..
God damn I need some tools. Couple questions here... what socket size are cage bolts because everyone I have it too small to fit them, do I need an oil filter wrench to get that ****** off, because I can't find mine, and what are some other sizes I should have.
My bdays coming up in a couple of weeks so I'm gonna ask shorty to pick me **** up for my bday from Sears. I'm trying to compile a list of everything I might need to fix the f4i as I constantly break it.
So far I need:
hex driver set
breaker bar
27mm socket
22mm socket
12" adjustable wrench
Any idea on what kind of saw to get to cut the 12 bar / tubing?
My bdays coming up in a couple of weeks so I'm gonna ask shorty to pick me **** up for my bday from Sears. I'm trying to compile a list of everything I might need to fix the f4i as I constantly break it.
So far I need:
hex driver set
breaker bar
27mm socket
22mm socket
12" adjustable wrench
Any idea on what kind of saw to get to cut the 12 bar / tubing?
a saw for cutting metal is called a hacksaw, theyre $10
Registered User
Joined: Aug 2004
Posts: 24,031
From: North Andover, MA
Re: I just got laid..
I Chose to No Longer Post
Joined: Apr 2004
Posts: 37,827
Re: I just got laid..
oh yeah you dont need an oil filter wrench for the bike. the filter is pretty easy to get to and its ok to destroy the old one when taking it off. the new one should only go on hand tight, so no need for a wrench there
a saw for cutting metal is called a hacksaw, theyre $10
a saw for cutting metal is called a hacksaw, theyre $10
i usually pound a screwdriver through my oil filters for leverage to twist them off
Zippy Tie Rider
Joined: Mar 2009
Posts: 3,408
From: Florida
Re: I just got laid..
When it it comes to computers/electronics, I know my **** it's how I make a living. Automotive/Bob Vila type ****, I don't know dick. It's embarrassing. I used to work construction too
.Going to pick up all that **** on the list. Going to see if I can squeeze these out of her as well.
Dainese are the good ones right?
I Chose to No Longer Post
Joined: Apr 2004
Posts: 37,827
Re: I just got laid..
Sooooo I took Scott987654321's recommendation and reformatted my pc using Ubuntu. Still not completely sure if I like it. My main PC got a virus - thanks Hollywood - and I have to reformat that one but wanted to try it on my spare pc first. I read online that you can setup a dual boot system using Win7 and Ubuntu and that they work very well together. Just curious Scoot - all my Windows based programs - I'm assuming that I cant use them running Ubuntu or can I? Just wondering about that really coz I have a bunch of programs that I'd like to be able to use but not sure if I can. I'ma try installing one of my DVD Copier programs to see if that works. Ubuntu recognized my external hard drives which my MAC wouldnt so thats cool. Just tryna figure some **** out before my final decision this week for my main pc.
http://www.winehq.org/
give linux some time - you'll never get a virus and never go back
all you gotta do is search for ripping dvd's ...
http://lmgtfy.com/?q=linux+copy+dvd
I Chose to No Longer Post
Joined: Apr 2004
Posts: 37,827
Re: I just got laid..
Eh last post for the night. Ubuntu is moving extremely slow. I dont have a lot of RAM in this pc but when I had WinXP installed it moved a lot quicker. While I thought - cool - Ubuntu has its own CD/DVD copy/burn program installed, it's not working for me. It recognized the source DVD but it wont recognize the blank DVD that I wanna copy to. It shows "select a disc to write to" and then is saying "please insert a recordable CD or DVD if you don't want to write to an image file". 
I cant figure that **** out Not sold on this **** just yet but I guess a lot is coz this **** is foreign to me. Any ideas on this scoot or feedback in general? And you have any idea about my question above 
Again, appreciate any help 
I cant figure that **** out Not sold on this **** just yet but I guess a lot is coz this **** is foreign to me. Any ideas on this scoot or feedback in general? And you have any idea about my question above Again, appreciate any help I Chose to No Longer Post
Joined: Apr 2004
Posts: 37,827
Zippy Tie Rider
Joined: Mar 2009
Posts: 3,408
From: Florida
Re: I just got laid..
Linux is great, but it requires you really know your ****. Ubuntu is like linux with training wheels though. Neal, why the hell are you running a linux box anyway? I stick with XP at home, nix is for the servers at work.
