can't wait .... got a month of hunting then on to boarding

 

When heated it would get bigger. Like when you install a steel sleeve into an aluminum block you heat the block then let it cool to lock the cylinder in place. Freeze the shaft if it doesn't work.

Thermal expansion : expanding holes

Consider a donut, a flat, two-dimensional donut, just to make things a little easier. The donut has a hole, with radius r, and an outer radius R. It has a width w which is simply w = R - r.
What happens when the donut is heated? It expands, but what happens to the hole? Does it get larger or smaller? If you apply the thermal expansion equation to all three lengths in this problem, do you get consistent results? The three lengths would change as follows:

The final width should also be equal to the difference between the outer and inner radii. This gives:

This is exactly what we got by applying the linear thermal expansion equation to the width of the donut above. So, with something like a donut, an increase in temperature causes the width to increase, the outer radius to increase, and the inner radius to increase, with all dimensions obeying linear thermal expansion. The hole expands just as if it's made as the same material as the hole.

 

thank you ..

by the way before you replied i actually did a little science experiment ..lol

i poked a hole in a dry piece of bread with a straw and then soaked the bread to get it to swell , the hole in the bread did in fact expand ...lol

 

Soo I just hit a deer on the way to work. It didn't do any damage just shattered the driver side headlight looks like I can't sell till I find a junk yard that has one cheap

 

did you throw it in the back and head to the butcher?

 

What vehicle?

 

I would have field dressed it with the leatherman wave I keep in the door pocket of my truck and taken it in for butchering.

 

what exactly does field dressing entail?

 

i dont know if ive mentioned this yet, but like in vegas, dont bother upgrading the lower level properties in italy. save it for the football stadium where an upgrade will get you an additional L$ 20k every 18 hours.

The exception to this - if youre a fighter, upgrading the port will let you access items with real good att/def numbers.

 

the bastered didnt die she just got up an ran away i have all my hunting stuff in my car i would have just gutted it right there and had it in steaks in an hour and half. me and my dad do all our butchering

 

97 jetta GT

 

i dont even know lol i think its just gutting it

 

Cutting out the entrails so the waste products don't leak and spoil the meat.
http://www.youtube.com/watch?v=IKm42ql7NSw

 

I think a 97 is more than the 10 year service contract we normally sign up to, but let me see if it is one of our lamps.

 

Scoot, **** buying a replacement insulator, I'm taking that bitch off. It doesn't do **** other then block airflow.
http://www.dfuser.com/Install%20Guid...2004-05-02.pdf

This means that my 10 second or so fast spin when I try to start up the truck is due to a low HPOP reservoir oil level. Looks like I still have more work to do with the gallon of oil and the syringe.

 

I'm doing it the hillbilly way though:
http://www.superdutydiesel.com/wiki/...hp?articleId=4

 

http://www.youtube.com/watch?v=6HKeN...layer_embedded

 

 

I think I'm just going to wear this wig all the time. I like having hair.

 

What's this mean? You have headlamps for random cars??