Omr BS thread
Re: Omr subcages !!!!!!!!!!!
before i go run errands, i have a question about a clutch for this busa i just got in last night. it's an 06 busa with a hydraulic clutch.
the guy said his clutch went out. from my experience, when a clutch goes out it starts slippin. his **** just went out completely. AAAAND, when i turn on the bike, pull the lever in and put it in gear, it won't go anywhere UNTIL the clutch lever is almost completely all the way out. i mean, it pulls just a tad then shuts off just as the clutch lever is fully let go. could this be air in the line instead of a burned out clutch?
also, u know how if u have a bike turned off and its in gear, the bike won't be able to move unless u pull in the clutch lever? this one will move. what could that be?
gonna forward this to omer too.
the guy said his clutch went out. from my experience, when a clutch goes out it starts slippin. his **** just went out completely. AAAAND, when i turn on the bike, pull the lever in and put it in gear, it won't go anywhere UNTIL the clutch lever is almost completely all the way out. i mean, it pulls just a tad then shuts off just as the clutch lever is fully let go. could this be air in the line instead of a burned out clutch?
also, u know how if u have a bike turned off and its in gear, the bike won't be able to move unless u pull in the clutch lever? this one will move. what could that be?
gonna forward this to omer too.
Last edited by Trachito; Apr 1, 2009 at 12:32 PM.
Re: Omr subcages !!!!!!!!!!!
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech

click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600 - 01, 02, 03, 04, 05<<<click here
- GSXR 750- 00, 01, 02, 03, 04, 05
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping


click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
Re: Omr subcages !!!!!!!!!!!
before i go run errands, i have a question about a clutch for this busa i just got in last night. it's an 06 busa with a hydraulic clutch.
the guy said his clutch went out. from my experience, when a clutch goes out it starts slippin. his **** just went out completely. AAAAND, when i pull the lever in and put it in gear, it won't go anywhere UNTIL the clutch lever is almost completely all the way out. i mean, it pulls just a tad then shuts off just as the clutch lever is fully let go. could this be air in the line instead of a burned out clutch?
also, u know how if u have a bike turned off and its in gear, the bike won't be able to move unless u pull in the clutch lever? this one will move. what could that be?
gonna forward this to omer too.
the guy said his clutch went out. from my experience, when a clutch goes out it starts slippin. his **** just went out completely. AAAAND, when i pull the lever in and put it in gear, it won't go anywhere UNTIL the clutch lever is almost completely all the way out. i mean, it pulls just a tad then shuts off just as the clutch lever is fully let go. could this be air in the line instead of a burned out clutch?
also, u know how if u have a bike turned off and its in gear, the bike won't be able to move unless u pull in the clutch lever? this one will move. what could that be?
gonna forward this to omer too.
Re: Omr subcages !!!!!!!!!!!
from my dad:
When you had a bridge over a river or stream, the deck structure needed to
be thick if the span was long. So truuses with cross braces were a good way
to do it. That trussing might be 10' high. If the distance above the river
was not great, like a few feet, the trusses would be in the way. So they had
the trussing above the deck instead of below it. These trusses were like
walls along side the deck. In the northern climates snow would collect in
there making the bridge impassible. So they covered the bridge. It was easy
to do because the trus walls were already there. Truss walls also kept
crosswinds to a minimum, preventing gusts from blowing a light wagon off the
bridge.
be thick if the span was long. So truuses with cross braces were a good way
to do it. That trussing might be 10' high. If the distance above the river
was not great, like a few feet, the trusses would be in the way. So they had
the trussing above the deck instead of below it. These trusses were like
walls along side the deck. In the northern climates snow would collect in
there making the bridge impassible. So they covered the bridge. It was easy
to do because the trus walls were already there. Truss walls also kept
crosswinds to a minimum, preventing gusts from blowing a light wagon off the
bridge.
Re: Omr subcages !!!!!!!!!!!
...until now. but he's still not allowed to talk like that and i told him something about watching his mouth
Re: Omr subcages !!!!!!!!!!!
last night my 8 yr old son was looking over my shoulder as i was posting and he read ur sig outloud. he started cracking up but i didnt find it funny listening to him talk like that.
...until now. but he's still not allowed to talk like that and i told him something about watching his mouth
...until now. but he's still not allowed to talk like that and i told him something about watching his mouth
Re: Omr subcages !!!!!!!!!!!
Hauling 51,000 pounds of Rock from Brisbane to Albany will earn your driver $3.34 per mile, a total of $8519.69 for the entire route. Your company specializes in this cargo type so you will receive a 5% bonus for delivery. If you are late you will be fined $100.00 per day that you are late.







