Omr BS thread
Re: Omr subcages !!!!!!!!!!!
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech

click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600 - 01, 02, 03, 04, 05<<<click here
- GSXR 750- 00, 01, 02, 03, 04, 05
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping


click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
Re: Omr subcages !!!!!!!!!!!
I listen to a big variety (depending on Mood) I mostly listen
to Hard N heavy
ProPain
Fear Factory
Chimira
Testament
Sepultura
slayer
etc....
but When I get in a phunky kind of mood..
Primus
House of pain
ICP
Dark lotus
Bloudhound Gang
etc.....
to Hard N heavy
ProPain
Fear Factory
Chimira
Testament
Sepultura
slayer
etc....
but When I get in a phunky kind of mood..
Primus
House of pain
ICP
Dark lotus
Bloudhound Gang
etc.....
Re: Omr subcages !!!!!!!!!!!
Only heard of Slayer from your top list.
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: Omr subcages !!!!!!!!!!!
Re: Omr subcages !!!!!!!!!!!
haha Re: Omr subcages !!!!!!!!!!!
http://www.youtube.com/watch?v=MqWaU...eature=related
bbbbuuuuuuuwwwwwwwahahahahahahahahahahahahahaha
OMFG!!!!!!!!!!!!!!!!!
bbbbuuuuuuuwwwwwwwahahahahahahahahahahahahahahaOMFG!!!!!!!!!!!!!!!!!
Re: Omr subcages !!!!!!!!!!!
I just manged to **** up the R6 real good and it was sitting on its kickstand minding its own bidness....lol
So I was putting the 636 back in its spot after working on it off and on all day. I pushed it off the rear stand and moved it around holding on to the round bar, got it in its spot next to the R6 and let it fall on to the kickstand...Well the stand was up..oops!!!! And it fell over knocking the R6 into the wall the 636's tail went threw the r.s. fairing destroying it....I just hope the headlight did not get to f'ed up (broken mounts) when the wall stopped the R6 from falling all the way over (headlight hit the wall)......
So I was putting the 636 back in its spot after working on it off and on all day. I pushed it off the rear stand and moved it around holding on to the round bar, got it in its spot next to the R6 and let it fall on to the kickstand...Well the stand was up..oops!!!! And it fell over knocking the R6 into the wall the 636's tail went threw the r.s. fairing destroying it....I just hope the headlight did not get to f'ed up (broken mounts) when the wall stopped the R6 from falling all the way over (headlight hit the wall)......
Re: Omr subcages !!!!!!!!!!!
I just manged to **** up the R6 real good and it was sitting on its kickstand minding its own bidness....lol
So I was putting the 636 back in its spot after working on it off and on all day. I pushed it off the rear stand and moved it around holding on to the round bar, got it in its spot next to the R6 and let it fall on to the kickstand...Well the stand was up..oops!!!! And it fell over knocking the R6 into the wall the 636's tail went threw the r.s. fairing destroying it....I just hope the headlight did not get to f'ed up (broken mounts) when the wall stopped the R6 from falling all the way over (headlight hit the wall)......
So I was putting the 636 back in its spot after working on it off and on all day. I pushed it off the rear stand and moved it around holding on to the round bar, got it in its spot next to the R6 and let it fall on to the kickstand...Well the stand was up..oops!!!! And it fell over knocking the R6 into the wall the 636's tail went threw the r.s. fairing destroying it....I just hope the headlight did not get to f'ed up (broken mounts) when the wall stopped the R6 from falling all the way over (headlight hit the wall)......


that sucks man.. 






seeya man