Omr BS thread
bitches!!!
Administrators
Joined: Jan 2006
Posts: 55,201
From: Arizona bbiittccheezzz
Re: Omr subcages !!!!!!!!!!!
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600 - 01, 02, 03, 04, 05<<<click here
- GSXR 750- 00, 01, 02, 03, 04, 05
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
Thread Starter
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Registered User
Joined: Sep 2006
Posts: 11,214
From: St. Paul MN...
Re: Omr subcages !!!!!!!!!!!
omer, the hard shift turned out to be what u said, loose shifter. cant really do anything about it though cuz it was due to a drop a long time ago. i called the guy about it and thats when he told me about that ****. he'd never mentioned it before. i rode it today and it did okay sometimes, depending on whether the shifter moved smoothly, ya know? had a hard *** ****** time getting it in neutral at one point though. just skipped back and forth between 1st and 2nd
My 636 did that when I got it... It ended up being that the shifter linkage rod was miss-adjusted...
Registered User
Joined: Feb 2006
Posts: 23,660
From: down souf
Re: Omr subcages !!!!!!!!!!!
eh, its only beer so u never know if u might decide to get totally fucked up off a bottle of bud light, lol.
Registered User
Joined: Feb 2006
Posts: 23,660
From: down souf
Thread Starter
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Registered User
Joined: Feb 2006
Posts: 23,660
From: down souf
Re: Omr subcages !!!!!!!!!!!
i hit the complete **** out of my finger today gutting this guy's exhaust today. its bruised under the nail. then after that, when i was revitting the exhaust, every time the damn rivet would snap, the rivet tool would hit the same ******* finger. there were close to 20 rivets on that damn thing.
Registered User
Joined: Sep 2006
Posts: 11,214
From: St. Paul MN...
Re: Omr subcages !!!!!!!!!!!
If it has a bend in it its no longer long enough.. It needs to be lengthened a bit so it will move the lever on the tranny a bit farther.. Sounds odd but it should do the trick..
Thread Starter
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: Omr subcages !!!!!!!!!!!
i hit the complete **** out of my finger today gutting this guy's exhaust today. its bruised under the nail. then after that, when i was revitting the exhaust, every time the damn rivet would snap, the rivet tool would hit the same ******* finger. there were close to 20 rivets on that damn thing.
Registered User
Joined: Feb 2006
Posts: 23,660
From: down souf
