I already put the tank back on so Ima rock it over the weekend to see how it actually rides but if it rides like **** then Ima swap the whole rail. Good lookin.

Word - I already did that That was like the first thing I did.

Okay now heres probably a stupid neal question. I cant get my front sprocket off the old motor. Its in gear sitting on the floor but when I put any force to try and loosen the nut it eventually spins the sprocket a little like its trying to bump start the bike. How the **** can I get the sprocket off? Should I jam something in there so the sprocket cant spin at all? If so, what?

 

OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

we got outbid by 20 cents

 

:YEAH Yeah Mike knows why they call it the death spin too lol. Mike did you get us a contract

 

 

only thing that will work now is a impact gun...I tryed jamming **** in there to hold it in place on my 02 and all I did was brake the case....

 

I think the trick is not getting flung off the bike..

planting your foot to get it to spin is the easy part......

staying on the bike seems to be the hard part....

 

**** So I could just bring it to any garage and have them do it I guess, right?

 

Happy Halloween Skanks!!!

 

Word. Ive seen Mike almost get tossed a bunch of times. He always manages to hold onto the bike but yeah it just looks like a violent highside. **** this sucks that I gotta bring the motor somewhere to have the sprocket removed I wish I wouldve taken it off before pulling the motor but I wasnt thinking about that ****

 

Bahumbug

 

feed the chain into the sprocket as you turn it. it will wind up enough to get stopped on the case

 

Scrooge!!!

 

oh damn. ok neal maybe attach the chain to something at the other end

 

yep... Anyone with a impact and the right size socket can get it done in about 3 seconds

 

I got a bullshit impact gun that plugs into the wall. You think that would do it Iono - it seems weak as hell. I gotta see if I have the adapter coz its a 3/4" drive and I dont think I have a 14mm 3/4" drive socket. And I dont think I have the adapter either so Im probably fucked either way

 

yeah it is

 

Hmmmm, I'll try that tomorrow. Hopefully it works.

 

is the B bike in pieces or just missing a motor?

 

thats how I broke my case....it still held oil and the new owner still don't know about it