Omr Subcage !!!!!!!!!!!
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: Omr Subcage !!!!!!!!!!!
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech

click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600/750 -00, 01, 02, 03, 04, 05
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping


click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
Re: Omr Subcage !!!!!!!!!!!
nick seems ****, layed back, and str8
dustin seems str8
the other buddy seems humble as ****
but i do feel the aura you are referring to, and think 85% of it comes from ONE person...
dustin seems str8
the other buddy seems humble as ****
but i do feel the aura you are referring to, and think 85% of it comes from ONE person...
Re: Omr Subcage !!!!!!!!!!!
robathorn isn't like that
Re: Omr Subcage !!!!!!!!!!!
"it took a little longer to replace the carrier bearing on your truck because it was so bad it had to be removed with a press."
.....um.....the bearing is a press fit onto the shaft......of course you needed a press.
.....um.....the bearing is a press fit onto the shaft......of course you needed a press.
Re: Omr Subcage !!!!!!!!!!!
I'm sitting here falling asleep.
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: Omr Subcage !!!!!!!!!!!
Ugh.. An hour to go. I can't stay awake.






