stock clutch is on there cuz my moose broke...

i didnt hang it there overnight, i hung it, poured fluid in, put a speed bleeder on the rear caliper and sucked all the air out... all in all took about 15min and it was ready to mount

 

bahh, **** that leave it on the clip-on and bleed it, the conventional way. my

 

OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

i think i still need to bleed it a little more cuz i couldn't get the tire to lock up with 1 finger but it works pretty ****** good

 

you probably cant get it to lock because you cut the lever so ******* short , the longer the break lever is the more leverage you get ....

mount your brake further in on the clipon and use a longer lever and you will have a better brake

 

What setup are you running?

 

if i was imagining some chick blowing football players, then you must have been imagining my friends neighbor blowing guys

***!!!!!

 

What are you, some kind of physics nerd?

 

word... thats the lever that came on it though....

1000rr master with a full throttle adaptor

 

brake on the inside of the clutch with a four piston caliper

 

ok that was funny

 

Damn it! I need to go watch some extreme submission to clear my head.


I found a chick who squirts more than Cytheria by the way. It's on x-videos and part of the squirting bukkake videos.

 

+1

unless you got a 4 piston in the back, that hb is straight weaksauce

 

nothing wrong with a 100rr master

 

I want a 4 piston on the back. My footbrake sucks.

 

EXACTAMUNDO!!!!!!!!!!!

rules for setting up the left clipon

#1 - brake lever as long as possible while keeping it out of harms way when the bike hits the floor
#2 - everything else revolves around rule #1

 

make some thing like this

 

i think a chick that squirts that much would get annoying. to clean up i mean. thats great if youre in a hotel room but i dont want my fancy satin sheets getting any more stains on them

 

Is it flat or is there welding involved?

 

lol, hey omr... make me one that i can run the 1000rr caliper with