when mine was younger and chased his frisbee with more enthusiasm i didn't even have to trim his nails but now he just jogs to where i throw it ...lol

 

OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years
• CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• Join PAR Trucking on Trukz.com
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

because you don't know all the advantages , if your girl was giving you all the advantages you would still be with her

 

Looks like the oven will dictate the size of the breaker. 3 things with 220 I plan on possibly running in my garage:
Electric oven
Air compressor
Welder

 

with the small sprocket, i like more idle for circles because a little throttle goes a long way. Its very easy to blip the throttle "too much" and lose your circle.

when i used to rock a 65 tooth, i ran my idle at 1200 and did everything on all throttle. When you blip the throttle with a huge sprocket, almost nothing happens. I feel the throttle is a lot more user friendly to big sprockets.

 

see now that makes no sense to me , when you have more gear the throttle is alot more twitchy because you have more torque when you have less gear you can grab a hand full of throttle and it barely reacts

 

So far ive only seen a couple advantages:

1. I have sex every single day
2. Dont have to go out for food as much, I just tell her to make me a sandwich
3.

The rest of the advantages are stuff that guys dont really dont care about like having a clean bathroom or laundry. So in that case theyre not really advantages

 

no, i've had all that extra stuff before, and my dick still yearned for more

 

I need to remember to stop by the dealership and get some tires on the way home.

 

welder is a real good idea. air compressor wont matter much. you might spend more looking for a compressor that takes 220

 

a clean house matters to me. i can get a chick that likes to have sex every day, i'm sure. i just don't like sleeping with the same person day in, day out, no matter how fine or good she is, or how much different **** we do. it gets old to me. food, IMO, is the biggest advantage. a clean house comes second. as far as sex, if a guy's game is on point (especially with omer's pick up lines ), then he can get it.

 

Surprisingly, the oven draws the most current. I'll probably end up getting a 33 gallon 120v compressor. All I plan on doing with the compressor is filling up tires, air tools, and some light sandblasting.

 

sandblasting and die grinder use a **** load of air , get the big compressor

 

i don't know how much niner intends to weld, but one that requires 220V is usually professional grade. he said he likes to have more than he needs but that's kinds of a waste to me. but then again, he doesnt have kids, so he can blow his loot.

 

reminder: get some tires on the way home

 

I like it twitchy Lol

If we were on 250's id agree with you about the torque. But to me, our 600's have tons of torque to begin with, and i never have a situation where i need more (not in the lots anyway).

I think our riding styles are too different to accurately compare, even tho we all do the same tricks pretty much.

 

off to lernch

 

For how much I will be doing those 2 things, I can wait for a smaller compressor to catch up.
I plan on buying a used welder, but I want the ability to weld 3/8's if I want to.

 

but your saying it is more twitchy with stock gear and that just isn't right

 

And return the coffee maker and buy a new cell phone.