Stunt Bike Forum

OMR SUBCAGE [subframe cage]

Thread Tools
 
Search this Thread
 
Old Jul 31, 2008 | 01:38 PM
Share
  #5961  
old man roger's Avatar
old man roger
Thread Starter
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
Originally Posted by MikeM
do you take the clipon off to do it? if not its real hard
i think in most cases not but there have been a few that i had the throttle tube on the clipon and then put the clipon back on the bike
Reply
Old Jul 31, 2008 | 01:38 PM
Share
  #5962  
old man roger's Avatar
old man roger
Thread Starter
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
OMR SUBCAGE (S)

OMR SUBCAGES available:
Honda
  • CBR F4i - 01, 02, 03 will also fit the single seat style with minor mods
  • CBR 954- all years
  • CBR 929- all years
  • CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here
Kawasaki Suzuki
  • GSXR 600/750 -00, 01, 02, 03, 04, 05
  • GSXR 1000 -01, 02, 03, 04
Yamaha
  • R6 - 03, 04, 05 <<< click here
  • R6s (old body style) - 06, 07, 08
$175 Shipped
pay pal accepted

Tech
  • The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position!
  • The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
  • THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
  • All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
  • omr subcages are available for all makes and models but only the ones listed above are available for shipping





click here to contact >> old man roger

the original folding peg subcage!!!!!!!!!

>>click here to see why i only sell folding peg subcages<<
Reply
Old Jul 31, 2008 | 01:38 PM
Share
  #5963  
MikeM's Avatar
MikeM
bp chaser
 
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
MikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
Originally Posted by MikeM
went to the apt today at lunch, and met up with becky and the kids. we got everything out of the upstairs, beckys still there making it look spotless. My spray paint collection is huge, i never realized that before. over 2 milk crates full. I need to start using them again.
also brought my set of spare trailer tires. Not sure why i have 2 matching spares, that seems a little odd.
Reply
Old Jul 31, 2008 | 01:39 PM
Share
  #5964  
NINER's Avatar
NINER
Retired
 
Joined: Mar 2003
Posts: 37,967
From: .
NINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
Originally Posted by MikeM
went to the apt today at lunch, and met up with becky and the kids. we got everything out of the upstairs, beckys still there making it look spotless. My spray paint collection is huge, i never realized that before. over 2 milk crates full. I need to start using them again.
How may more trips do you have?

Hey mike, do you have a left rear f4i/600rr/1000rr/900rr/929/954 peg?
Reply
Old Jul 31, 2008 | 01:40 PM
Share
  #5965  
NINER's Avatar
NINER
Retired
 
Joined: Mar 2003
Posts: 37,967
From: .
NINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
Originally Posted by MikeM
also brought my set of spare trailer tires. Not sure why i have 2 matching spares, that seems a little odd.
In case you blow out 2 tires on a long trip?
Reply
Old Jul 31, 2008 | 01:42 PM
Share
  #5966  
Zuki750's Avatar
Zuki750
I Have Too Much Free Time
 
Joined: Oct 2002
Posts: 16,023
From: Bangor, ME
Zuki750 has a brilliant futureZuki750 has a brilliant futureZuki750 has a brilliant futureZuki750 has a brilliant futureZuki750 has a brilliant futureZuki750 has a brilliant futureZuki750 has a brilliant futureZuki750 has a brilliant futureZuki750 has a brilliant futureZuki750 has a brilliant futureZuki750 has a brilliant future
Re: OMR SUBCAGE [subframe cage]
Originally Posted by MikeM
also brought my set of spare trailer tires. Not sure why i have 2 matching spares, that seems a little odd.
Do you still have your open trailer with air bags? What was the point of that again?
Reply
Old Jul 31, 2008 | 01:43 PM
Share
  #5967  
old man roger's Avatar
old man roger
Thread Starter
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
time for a smoke
Reply
Old Jul 31, 2008 | 01:44 PM
Share
  #5968  
MikeM's Avatar
MikeM
bp chaser
 
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
MikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
Originally Posted by NINER
How may more trips do you have?

Hey mike, do you have a left rear f4i/600rr/1000rr/900rr/929/954 peg?
all i have left to bring are 3 bikes, a shelf unit, and then a billion small things that i dont have boxes for


no extra peg
Reply
Old Jul 31, 2008 | 01:45 PM
Share
  #5969  
MikeM's Avatar
MikeM
bp chaser
 
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
MikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
Originally Posted by NINER
In case you blow out 2 tires on a long trip?
My first reaction is that one of my trailers doesnt have matching wheels right now, but its hard to keep track.
Reply
Old Jul 31, 2008 | 01:46 PM
Share
  #5970  
MikeM's Avatar
MikeM
bp chaser
 
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
MikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
Originally Posted by Zuki750
Do you still have your open trailer with air bags? What was the point of that again?
thats on loan to a friend right now

and it was just for fun, but i never got around to it. maybe i could load bikes withotu a ramp
Reply
Old Jul 31, 2008 | 01:48 PM
Share
  #5971  
NINER's Avatar
NINER
Retired
 
Joined: Mar 2003
Posts: 37,967
From: .
NINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
Originally Posted by NINER
Going to pick up/order 4 caliper bolts and 2 subcage bolts (if needed) after work.
After that I am going to grind out a 20mm clutch lever extention piece. I have to put up a myspace bulletin about who has a mig welder.
Reply
Old Jul 31, 2008 | 01:51 PM
Share
  #5972  
old man roger's Avatar
old man roger
Thread Starter
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
Originally Posted by NINER
After that I am going to grind out a 20mm clutch lever extention piece. I have to put up a myspace bulletin about who has a mig welder.
i have seen a thread about a weldless version of the clutch arm mod but if you can weld it that would probably be better
Reply
Old Jul 31, 2008 | 01:52 PM
Share
  #5973  
old man roger's Avatar
old man roger
Thread Starter
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
20mm ? that might be a little long and make it hard to adjust the clutch right
Reply
Old Jul 31, 2008 | 02:01 PM
Share
  #5974  
old man roger's Avatar
old man roger
Thread Starter
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
the longer the mod the closer to the bar you will need to pull the lever to get the clutch to disengage and if you go too long you will need to tighten the cable too much in order to get it to disengage where you want it to
Reply
Old Jul 31, 2008 | 02:01 PM
Share
  #5975  
NINER's Avatar
NINER
Retired
 
Joined: Mar 2003
Posts: 37,967
From: .
NINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
Originally Posted by old man roger
i have seen a thread about a weldless version of the clutch arm mod but if you can weld it that would probably be better
That is some afro-engineering.
Originally Posted by old man roger
20mm ? that might be a little long and make it hard to adjust the clutch right
I'll have to look at it after I cut it all out and see how it looks. It is only 3/4 of an inch.
Reply
Old Jul 31, 2008 | 02:02 PM
Share
  #5976  
becky's Avatar
becky
what is he doing?
 
Joined: Feb 2004
Posts: 16,155
From: ny
becky has a reputation beyond reputebecky has a reputation beyond reputebecky has a reputation beyond reputebecky has a reputation beyond reputebecky has a reputation beyond reputebecky has a reputation beyond reputebecky has a reputation beyond reputebecky has a reputation beyond reputebecky has a reputation beyond reputebecky has a reputation beyond reputebecky has a reputation beyond repute
Re: OMR SUBCAGE [subframe cage]
just got home.....everything looks good enough minus your carpet, but all that needs done is a good vacuum...i swept up everything i could do. now i'm relaxing before going out to the pool
Reply
Old Jul 31, 2008 | 02:02 PM
Share
  #5977  
NINER's Avatar
NINER
Retired
 
Joined: Mar 2003
Posts: 37,967
From: .
NINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for repNINER User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
Originally Posted by old man roger
the longer the mod the closer to the bar you will need to pull the lever to get the clutch to disengage and if you go too long you will need to tighten the cable too much in order to get it to disengage where you want it to
I know.
Reply
Old Jul 31, 2008 | 02:03 PM
Share
  #5978  
old man roger's Avatar
old man roger
Thread Starter
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
Originally Posted by NINER
I know.
ok ok
Reply
Old Jul 31, 2008 | 02:03 PM
Share
  #5979  
MikeM's Avatar
MikeM
bp chaser
 
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
MikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for repMikeM User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
<<< in need of a caffinated beverage
Reply
Old Jul 31, 2008 | 02:04 PM
Share
  #5980  
old man roger's Avatar
old man roger
Thread Starter
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: OMR SUBCAGE [subframe cage]
Originally Posted by KC Becky
just got home.....everything looks good enough minus your carpet, but all that needs done is a good vacuum...i swept up everything i could do. now i'm relaxing before going out to the pool
are you on the couch eating bon bons
Reply



Advanced Search

All times are GMT -4. The time now is 02:53 PM.