OMR SUBCAGE [subframe cage]
#4122
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: OMR SUBCAGE [subframe cage]
just look at the orings and if they are all fucked up or spread out then there junk if they are still normal shaped then they are fine ....they are pretty tough
#4124
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: OMR SUBCAGE [subframe cage]
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years
- CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here
- GSXR 600/750 -00, 01, 02, 03, 04, 05
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position!
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
#4125
Re: OMR SUBCAGE [subframe cage]
too slow or omr's too fast. I'll check the orings out tomorrow. If theyre fucked I could use the rings that I just took off if theyre in good shape or should I buy new ones?
#4126
Re: OMR SUBCAGE [subframe cage]
#4127
#4128
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
#4130
Re: OMR SUBCAGE [subframe cage]
#4132
Re: OMR SUBCAGE [subframe cage]
Is that $69.50 or $9.99
And yeah Ima try to go higher but what sucks is I always place my bids at the last possible second so if I start at 1.80 or some ****, I wont know if we lost it til its too late. I think Im just gonna bid $1.59 and pray we get it. Or should i just bid 1.50?
And yeah Ima try to go higher but what sucks is I always place my bids at the last possible second so if I start at 1.80 or some ****, I wont know if we lost it til its too late. I think Im just gonna bid $1.59 and pray we get it. Or should i just bid 1.50?
#4135
#4136
Registered Spammer
Join Date: Apr 2004
Location: 1101 Main Street North, Austin, MN, United States
Age: 40
Posts: 38,852
Re: OMR SUBCAGE [subframe cage]
#4137
Re: OMR SUBCAGE [subframe cage]
#4138
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
#4140