subframe cage
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: subframe cage
OMR Subframe Cage(s)new page gotta have pics
subframe cages available
Yamaha
- R6 - 03, 04, 05 <<< click here
- CBR F4i - 01, 02, 03
- CBR 954- all years
- CBR 929- all years
- CBR 600RR - 03, 04, 05, 06, 07 <<< click here
- GSXR 600/750 -00, 01, 02, 03, 04, 05
- GSXR 1000 -01, 02
Tech
- The 03-06 CBR 600rr & the 03-05 Yamaha R6 pegs are lowered and moved back and out for better peg position!
- The 01-03 gsxr's have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lowers 3 inches wider (Then stock)
- All other models are in the stock location except they are rotated on there axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.



Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: subframe cage
if i could get one here i would make em because i got alot of people asking for them........
one guy bought an 01 02 03 f4i subcage to put on his 05 and i think all he is gonna have to do is drill one new hole in the mounting plate and use some washers but he hasn't gotten back to me yet to tell me how it went
one guy bought an 01 02 03 f4i subcage to put on his 05 and i think all he is gonna have to do is drill one new hole in the mounting plate and use some washers but he hasn't gotten back to me yet to tell me how it went
Re: subframe cage
Can you let me know when he does because I dont know if I'm gonna switch from the naner seat. I'm confused. If its as easy as what you're saying then I'll pick one up from you. lmk. Later.
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: subframe cage
well i think it will be as easy as that the 05 peg brackets go in between the tabs and mike m measured his for me and my 01 02 03 subcage should slide right up where the stockers go but the mounting holes on the 05 are a little narrow compared to the 01 02 03 so either opening up both holes on the subcage or using one supplied hole and drilling another one should work then just some washers to take up the space between the tabs becaus the steel mounting plate on my 01 02 03 subcage isn't as thick as the aluminum stock 05 peg bracket
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
















this is awesome lol