SA to front mm bolt 19 1/4

SA to bottum SF bolt 6 3/4

 

Give or take a millimiter

 

Subframe Cage(s)
new page gotta have pics
subframe cages available
Yamaha

• R6 - 03, 04, 05 <<< click here

Honda

• CBR F4i - 01, 02, 03
• CBR 954- all years
• CBR 929- all years
• CBR 600RR - 03, 04, 05, 06, 07 <<< click here

kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 <<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05
• GSXR 1000 -01, 02

$175 Shipped

Tech

• The 03-06 CBR 600rr & the 03-05 Yamaha R6 pegs are lowered and moved back and out for better peg position!
• The 01-03 gsxr's have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lowers 3 inches wider (Then stock)
• All other models are in the stock location except they are rotated on there axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• 
  
  

 

Let me guess you had to take the cage off

 

ok with out taking the cage off it looks like it is the same ....

there are a few things that you will have to do to the bike to use my crash cage because i usually install them for people and i don't usuallly sell crash cage over the net ....

1-you will have to remove your kickstand switch and get get a longer bolt for the front kickstand bolt because thats where the bottom of the cage mounts

2- you will need to grind about a 1/4 inch off your front sprocket cover because there is a tab that goes between the front sprocket cover and the frame to keep the mounting tab from twisting during a bad crash ,you will see where to grind once you have the cage [see pic it's the mount that bolts to the swing arm bolt]

3 -you will need two 1 inch longer motor mount bolts for the front

4-you will need a peice of all thread long enough to go through you swing arm bolt

 

let me know what you think

 

What is all thread? and You should just send me the longer bolts lol

Those ******* sent me the wrong motor mount bolt in the first place. It doesnt even come throgh the back of the hole.

 

all thread is just what it sounds like it is a long rod that is threaded all the way through the whole length of the rod ...lowes ,home depot ,any hardware store has it

threaded rod....

 

and for the front motor mount bolts you could get standard thread nut and bolt at any hardware store it doesn't need to be mtric becasue you just get a nut and blot that fits through the whole the only one that needs to be metric is the one that replaces the kick stand bolt...

why don't you just take a subframe cage i got that already to go and it's a direct fit....

 

you do know that the nut sits in a pocket in the motor right....?

 

yeah, i been buying tools here and there, and even if i used them once, they might come in handy in the future if i have to do the same procedure again.

whenever i have my own garage, ill have tools to break **** with :D

 

carlos there is a slight chance i may not be riding tomorrow.......

might be taking a trip to orlando but nothing is set in stone yet...

 

No, I need a cage

No I didnt

 

there is a little pocket on the motor that the nut sits in ,the bolt only goes through to the pocket just enough to catch the nut and thread all the way through the nut

 

cool, just let me know as soon as you know whatsup, that way i have chance to plan something else.


I cut the chain off. prob hooking the new one up tomorrow if i figure how to use the chain link tool.

 

The bolt they gave me doesnt even reach the pocket.

 

Like this

 

I cant even find a nut big enough to fit into the axle. Theirs no good shops around here that deal with just nuts and bolts

 

Roger, nevermind, my birthday is on saturday, so ill spend friday night with the girlie and family. and i havent gotten the video ready because my girl's laptop just caught a virus recently but ill get it going soon.

see ya next week, or maybe sunday if they let me out early.

 

alright carlos

and no pat, all thread is solid like a bolt but all threaded with no head you just put a nut on bolth ends