XR 50 Twelve Bars
XR 50 Twelve Bars
The laser cut 12 bars are in stock!
1. These are 1/4" x 1" laser cut piece
2. Custom made to the shape of the subframe and uses the subframe to mount but does not use the subframe for strength. 3. No drilling, no cutting, no welding, no mods!
4. Bolts on with 4 custom U-bolts that have saddle straps welded to them to prevent creasing the subframe.
5. Mounting tabs on the 12 bar are 3/8" x 1" cold drawn steel.
6. As with all FI 12 bars, this too has a replaceable skid plate.
7. Skid plate is 8" wide, which enables the 50 to be parked at 12 but isn't too big for the bike.
8. All 12 bars are powder coated
Place your order in the Stuntlife store.
http://store.stuntlife.com/Merchant2...de=XR50Wheelie
1. These are 1/4" x 1" laser cut piece
2. Custom made to the shape of the subframe and uses the subframe to mount but does not use the subframe for strength. 3. No drilling, no cutting, no welding, no mods!
4. Bolts on with 4 custom U-bolts that have saddle straps welded to them to prevent creasing the subframe.
5. Mounting tabs on the 12 bar are 3/8" x 1" cold drawn steel.
6. As with all FI 12 bars, this too has a replaceable skid plate.
7. Skid plate is 8" wide, which enables the 50 to be parked at 12 but isn't too big for the bike.
8. All 12 bars are powder coated
Place your order in the Stuntlife store.
http://store.stuntlife.com/Merchant2...de=XR50Wheelie
Everyone is runnin these down here. The guys that arent keep stealing the fiddys with them to beat on! One guy even unbolted Dan's last weekend and put it on another to stunt! HAHHAHA
Im no stunter so I dont have one.... But the stunters are SLAMMIN them into the ground RELENTLESSLY and no damage anywhere!!!
Im no stunter so I dont have one.... But the stunters are SLAMMIN them into the ground RELENTLESSLY and no damage anywhere!!!
The original message was received at Sat, 10 Jan 2004 08:11:01 -0500 (EST) from webspool.valueweb.net [216.219.253.198]
*** ATTENTION ***
Your e-mail is being returned to you because there was a problem with its delivery. The address which was undeliverable is listed in the section
labeled: "----- The following addresses had permanent fatal errors -----".
The reason your mail is being returned to you is listed in the section
labeled: "----- Transcript of Session Follows -----".
The line beginning with "<<<" describes the specific reason your e-mail could not be delivered. The next line contains a second error message which is a general translation for other e-mail servers.
Please direct further questions regarding this message to your e-mail administrator.
--AOL Postmaster
----- The following addresses had permanent fatal errors ----- <stuntlifeparts@aol.com>
----- Transcript of session follows -----
... while talking to air-yg03.mail.aol.com.:
>>> RCPT To:<stuntlifeparts@aol.com>
<<< 550 stuntlifeparts IS NOT ACCEPTING ANY MAIL
550 <stuntlifeparts@aol.com>... User unknown
*** ATTENTION ***
Your e-mail is being returned to you because there was a problem with its delivery. The address which was undeliverable is listed in the section
labeled: "----- The following addresses had permanent fatal errors -----".
The reason your mail is being returned to you is listed in the section
labeled: "----- Transcript of Session Follows -----".
The line beginning with "<<<" describes the specific reason your e-mail could not be delivered. The next line contains a second error message which is a general translation for other e-mail servers.
Please direct further questions regarding this message to your e-mail administrator.
--AOL Postmaster
----- The following addresses had permanent fatal errors ----- <stuntlifeparts@aol.com>
----- Transcript of session follows -----
... while talking to air-yg03.mail.aol.com.:
>>> RCPT To:<stuntlifeparts@aol.com>
<<< 550 stuntlifeparts IS NOT ACCEPTING ANY MAIL
550 <stuntlifeparts@aol.com>... User unknown
https://www.stuntlife.com/forums/sho...692#post646692
Go to this forum and click on the "Dan's 12 o'clock to see a video clip of it in action.......
Go to this forum and click on the "Dan's 12 o'clock to see a video clip of it in action.......
Thread
Thread Starter
Forum
Replies
Last Post








? 


