cbr f2 clutch wheelies(how -to)

Thread Tools
 
Search this Thread
 
Old Sep 7, 2003 | 08:36 PM
  #1  
james99099's Avatar
Thread Starter
Registered User
 
Joined: May 2003
Posts: 113
From: Desoto,Mo
james99099 is an unknown quantity at this point
cbr f2 clutch wheelies(how -to)

I could do these like mad on my sv 650 in 2nd. Aparrently the 600 is a different beast. I can not pull these up in second for the life of me. tried going around 35-45 slip clutch and let revs go up 1-2 thousand rpms and all i get is a little jerk or whelspin. I have a two bothers slip on and k&N filter with no jetting done ,will this throw it off that much. also have -1 tooth in front and 520 racing conversion vortex sprockets. please help guys.
Thanks!!!
Old Sep 7, 2003 | 10:17 PM
  #2  
Fizzer's Avatar
Registered User
 
Joined: Jul 2003
Posts: 474
From: milwaukee wi
Fizzer is an unknown quantity at this point
I have noticed on my 600 that sometimes high RPM's hurts it. Try going about thirty and snap the clutch at about 6000 rpm. i do it while im standing. i hope it helps.
Old Sep 7, 2003 | 11:07 PM
  #3  
dwe's Avatar
dwe
Registered User
 
Joined: Oct 2002
Posts: 93
From: Dallas, Tx
dwe is an unknown quantity at this point
GEARRRRR it
Old Sep 7, 2003 | 11:33 PM
  #4  
jaxon23's Avatar
Registered User
 
Joined: Oct 2002
Posts: 591
From: Foley, Alabama
jaxon23 is an unknown quantity at this point
it should wheelie stock in 2nd...my 93 F2 did....may wanna make sure the clutch isn't slipping
Attached Thumbnails Click image for larger version

Name:	jaxonstandup3.1.jpg
Views:	207
Size:	43.4 KB
ID:	32263  
Old Sep 8, 2003 | 01:10 AM
  #5  
khelben's Avatar
Registered User
 
Joined: May 2003
Posts: 226
From: San Diego, CA
khelben is an unknown quantity at this point
i got a 93 F2 as well, but i can't manage to pop it up, how do you guys do it ?
step by step if possible, im still on the learning curve.

thx
Old Sep 8, 2003 | 01:16 PM
  #6  
SMOKINJOE UR's Avatar
Registered User
 
Joined: Dec 2002
Posts: 107
From: DIRTY JERSEY
SMOKINJOE UR is an unknown quantity at this point
u have to pop the clutch at about 35mph and give more gas than first gear wheelies.also it helps to stand and pull up when u do it
Old Sep 8, 2003 | 01:21 PM
  #7  
tequilagb's Avatar
Registered User
 
Joined: Apr 2003
Posts: 162
From: Tucson, AZ
tequilagb is an unknown quantity at this point
Originally posted by jaxon23
it should wheelie stock in 2nd...my 93 F2 did....may wanna make sure the clutch isn't slipping
That exhaust looks sick! Is that a high-mount? I've been looking for a high-mount for my '98 F3 forever. Hook it up if you know where...
Old Sep 8, 2003 | 04:46 PM
  #8  
jaxon23's Avatar
Registered User
 
Joined: Oct 2002
Posts: 591
From: Foley, Alabama
jaxon23 is an unknown quantity at this point
Leo Vince...keeps the rear passenger pegs too
Attached Thumbnails Click image for larger version

Name:	f2_11.jpg
Views:	260
Size:	20.5 KB
ID:	32365  
Old Sep 8, 2003 | 10:14 PM
  #9  
dwe's Avatar
dwe
Registered User
 
Joined: Oct 2002
Posts: 93
From: Dallas, Tx
dwe is an unknown quantity at this point
try it gradually. get rolling around 35mph. clutch it and grab like 6000rpm and let it fly, if that doesnt do the trick, grab 6500 or 7000rpm the next time.

also if your just learning wheelies (and I promise 90% of the people that can on this site will tell you the same)
we all asked the same questions when we learned and we all got the same answer. IT sucks but just get out there and do it over and over again.
Eventually you will just start to feel it. Learn the timing of the clutch vs. gas.
Also when you try em. goose it a little and wait for that moment right when the bikes weight transfers back, then nail it again oh yeah and clutch.

I was joking earlier about gearing but you gotta know it helps once you learn the basics of wheeliing (is that a word?)
Old Sep 8, 2003 | 11:38 PM
  #10  
khelben's Avatar
Registered User
 
Joined: May 2003
Posts: 226
From: San Diego, CA
khelben is an unknown quantity at this point
alright thx bro, ill try that, until now ive only been trying and doing some first gear wheelies, their fun when they pop good, but too hard to keep on.

thx again
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stuntin'_cbr
Bike Parts for Sale
23
Nov 20, 2024 11:08 PM
Tony MPZ
Bikes for Sale
3
Jan 14, 2016 01:08 AM
caper
XR50 & Minibike Forums
7
Dec 19, 2012 02:12 PM
Mikeski
Stunt Discussion
4
Oct 31, 2012 04:58 AM
D-Mann
D-Mann
9
Dec 8, 2004 08:13 PM




All times are GMT -4. The time now is 05:23 PM.