I need some help with wheeling!!!!

Old Aug 28, 2011 | 02:13 PM
  #1  
monsterking's Avatar
Thread Starter
Registered User
 
Joined: Aug 2011
Posts: 3
From: wisconsin
monsterking is a decent person
I need some help with wheeling!!!!

Im new to the stunting so i've been knocking my head against the wall for a while with the power wheelie. I know that you need to roll off the throttle then crack it open again but i guess im just not doing it right or something like that. if you have any advice on the power wheelie or the clutch wheelie please let me know!!!
http://images.ibsrv.net/ibsrv/res/sr...s/banghead.gif
Old Aug 29, 2011 | 09:06 PM
  #2  
cx6r's Avatar
Registered User
 
Joined: Dec 2010
Posts: 51
From: phoenix,Arizona, United States
cx6r is a decent person
Re: I need some help with wheeling!!!!

power wheelies are gay bro. practice clutching it up from about 5-10 miles or at a complete stop if you are trying to learn slow wheelies. cover the rear brake and use this to bring the front wheel down, dont try popping it up to balance point or anything like that right away without understanding how to use the rear brake or your gunna just brake your ****.

as far as how to clutch it up, pull the cluth in and bring the rpms up and slip the clutch out smoothly, dont just bring it up to eight grand right away and pop the clutch, start at around 5 or 6 or somethin and see how far the tire comes up if any and go from their. get comfortable with how it feels to be on one wheel

all bikes are different so when you should release the clutch and what not will vary from bike to bike, let us know what bike you have
Old Aug 29, 2011 | 11:06 PM
  #3  
Old Man Spooner's Avatar
Registered User
 
Joined: Jan 2009
Posts: 195
From: Lubbock, Texas
Old Man Spooner is a decent person
Re: I need some help with wheeling!!!!

If I were you, I would try learning in second gear using the clutch rolling around 30. You have alot less torque to worry about and more straight line motion. Keep your brake covered and practice bringing it up a little further as you get comfortable and using the brake to slowly bring it back down so by the time you actually feel comfortable bringing it back to bp you will already be in the habit of using your brake.
Old Aug 30, 2011 | 09:55 PM
  #4  
monsterking's Avatar
Thread Starter
Registered User
 
Joined: Aug 2011
Posts: 3
From: wisconsin
monsterking is a decent person
Re: I need some help with wheeling!!!!

Hey thanks for the advice...i got a 09 zx6r
Old Aug 31, 2011 | 11:48 PM
  #5  
STUDROCK's Avatar
Registered User
 
Joined: May 2004
Posts: 1,296
From: Savannah, Ga
STUDROCK is a decent person
Re: I need some help with wheeling!!!!

Originally Posted by cx6r
power wheelies are gay bro. practice clutching it up from about 5-10 miles or at a complete stop if you are trying to learn slow wheelies. cover the rear brake and use this to bring the front wheel down, dont try popping it up to balance point or anything like that right away without understanding how to use the rear brake or your gunna just brake your ****.

as far as how to clutch it up, pull the cluth in and bring the rpms up and slip the clutch out smoothly, dont just bring it up to eight grand right away and pop the clutch, start at around 5 or 6 or somethin and see how far the tire comes up if any and go from their. get comfortable with how it feels to be on one wheel

all bikes are different so when you should release the clutch and what not will vary from bike to bike, let us know what bike you have
post 40 but good look
Old Aug 31, 2011 | 11:51 PM
  #6  
STUDROCK's Avatar
Registered User
 
Joined: May 2004
Posts: 1,296
From: Savannah, Ga
STUDROCK is a decent person
Re: I need some help with wheeling!!!!

Originally Posted by Old Man Spooner
If I were you, I would try learning in second gear using the clutch rolling around 30. You have alot less torque to worry about and more straight line motion. Keep your brake covered and practice bringing it up a little further as you get comfortable and using the brake to slowly bring it back down so by the time you actually feel comfortable bringing it back to bp you will already be in the habit of using your brake.
right
Old Sep 1, 2011 | 02:47 AM
  #7  
cx6r's Avatar
Registered User
 
Joined: Dec 2010
Posts: 51
From: phoenix,Arizona, United States
cx6r is a decent person
Re: I need some help with wheeling!!!!

Originally Posted by STUDROCK
post 40 but good look

i was waiting for someone to say that, who gives a **** about post counts bro, doucher

Last edited by cx6r; Sep 1, 2011 at 02:57 AM.
Old Sep 6, 2011 | 02:33 PM
  #8  
love2stunt600's Avatar
Registered User
 
Joined: Sep 2011
Posts: 3
love2stunt600 is a decent person
Re: I need some help with wheeling!!!!

i been having trouble in second gear..i have first gear down but before i no it im at the end of my rpms and im putting the bike down..i get it like a foot off the ground..do you really have to pull back that hard..cuz i have a 2010 cbr 600rr and second gear seems to be giving me a little bit of a hassle..any help and tips would be greatly appreciated..THanks alot
Old Sep 12, 2011 | 11:41 PM
  #9  
wrexttboy's Avatar
Registered User
 
Joined: Jun 2009
Posts: 54
From: Stevens point, Wi usa
wrexttboy is a decent person
Re: I need some help with wheeling!!!!

Get your game locked down in first gear. The faster you go, the more **** you break. Including yourself. If anything go taller on your rear sprocket get to know engine braking and brake control. Jus take one step at a time.
Old Sep 13, 2011 | 07:33 PM
  #10  
v8killaz's Avatar
Registered User
 
Joined: May 2010
Posts: 8
From: detroit
v8killaz is a decent person
Re: I need some help with wheeling!!!!

Originally Posted by wrexttboy
Get your game locked down in first gear. The faster you go, the more **** you break. Including yourself. If anything go taller on your rear sprocket get to know engine braking and brake control. Jus take one step at a time.
2nd gear goes up smoother and comes down smoother. 1st gear is twitchy. hit the throttle a little and you will loop it. also have to take the bike higher than 2nd. when i started out i found 2nd gear wheelies alot easier than 1st gear
Old Sep 14, 2011 | 10:08 PM
  #11  
jake556's Avatar
Registered User
 
Joined: Sep 2011
Posts: 14
From: HSV, AL
jake556 is a decent person
Re: I need some help with wheeling!!!!

Remember to roll back into the throttle a bit coming down.
Old Sep 19, 2011 | 11:55 AM
  #12  
2011_6IXXER's Avatar
Registered User
 
Joined: Sep 2011
Posts: 20
From: Canada, eh?
2011_6IXXER is a decent person
Re: I need some help with wheeling!!!!

Originally Posted by Old Man Spooner
If I were you, I would try learning in second gear using the clutch rolling around 30. You have alot less torque to worry about and more straight line motion. Keep your brake covered and practice bringing it up a little further as you get comfortable and using the brake to slowly bring it back down so by the time you actually feel comfortable bringing it back to bp you will already be in the habit of using your brake.
+1
Im fixing my 2011 right now because I didnt make the back brake second nature. Oh well live an learn. Oh and buy rails or a cage!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2gofast
Stunt Discussion
4
Apr 5, 2017 10:29 AM
ACTION
Bike Parts for Sale
1
Sep 16, 2013 05:24 PM
clepire
Bike Parts for Sale
4
Jun 20, 2013 06:42 AM
Standupnfall
Stunt Discussion
1
May 6, 2013 11:16 PM
nodelbeen
General Sportbike Discussion
0
Nov 23, 2012 04:43 AM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:34 PM.