i just took off the front end on the f4i and running the streetfighter light but theres alot of damn wires that i got no idea wat there are. i just bypass the tip over sensor so thats done, but theres still the front light, signals and other wires thats i dont wat there are. can anybody tell me how to bypass all that.

 

Un plug them and go ride

 

i just balled them up and stuffed them behind my acerbis light. when i took it all off the thing wouldnt start so just left em.

 

ya gotta dig on here. Its been 3 years since I did that and bake my brain on a daily. I know ya gotta jump a red and green wire in the harness. but I could be wrong. that may have been to get the acerbis headlight to turn on with out the front harness.I cant remember and taped the **** out of it and stuffed it in the left airbox inlet. like I said just dig into the site. its on here.good luck

 

Un plug that mess at the big grey connector jump the red and green on the connector and no mess and it runs

 

tuck your wires UNDER your air box, above your valve cover

If you remove the harness, you'll have to splice the main harness, making a $100 harness worth $10

 

+1 dont hack build a nice solid jumper wire and jump it at the lager grey plug tape it up. you will have less wires to hide.

 

But if you do cut the harness leave wire on the plug so you can use wire splicers to wire it back to stock if need be. so you dont really ruin the harness. and a loose or corroded jumper wire can ruin your day in a hurry. plus a few days after that. I say solder that **** with high lead solder wire. check deans racing. high grade R/C ****.