Check it i know alot of people have done it and i searched but couldnt find anything so i made another 636 fan fit on my radiator and just made some aluminum tabs and jb welded it to the radiator....im not sure how well it works yet i have to go get some radiator fluid but my **** has been running really hot and its a brand new radiator it will run normally at 235 and that HOT!!!! and it used to run at 215 or so in the lot....dont know what to do so i did this. like i said not sure how it works but im gonna run one to a switch and the other stock like it is normally.

 

have you mounted it yet? I had clearance issues with mine.

 

jb weld isnt strong enuf to hold for a duration of time and that 2nd fan is prob. gonna hit your cam pulse sensor

 

smart thinking...i may look at doing that to my r6 if i get a chance

 

i think mine was rubbing the heads or some ****.. been too long ago.

oh and i thought the 636 radiators had a spot from the factory to bolt a second fan to. thats how i had mine run.

 

My track buddies do the same thing on their 05-06's. I sold my 06 cuz I couldn't keep it from overheating. hope it works out for you. BTW don't use water wetter if you can help it. For some reason I don't think the 05-06 radiator likes it AT ALL. regular coolant keeps the bike at a better temp, even if it's still high.

 

break off the JB and clean up the radiator. see if you can take it to a radiator shop to have your tabs welded on.

I JB welded tabs onto my broken headlight a few years back, it didnt hold very long... the stuff isnt all that strong.

 

+1...when that jb weld breaks loose that fan will most likely get shoved into your rad. and fuuuuuck it all up...

 

well its sodered and jb welded......and i spoke too soon it does have clearance issues....but im gonna run it and see worst thing happens ill take the fan off.....

i took it to a rad. shop they said it was too thin to weld it.

 

use this ****. it will hold together a battleship. i use it on everything

 

if the jb weld breaks i will so im gonna see if it will hold up or not then ill let you all know but i was only about a 1/4'' off on clearance for the bottom mount so i zippy tied it and gonna run it as long as it dont hit ill be stoked

 

busted radiator.

 

damn. keep the thread updated. wondering if I'll have to do something like this on my '04.

 

^^^+^^ I used that stuff to fix a hole that got knocked in my stator cover. good ****.

 

r6 fans are small enough to clear the cam sensor and im pretty sure you can take the sensor out and turn it too

 

im not hitting cam sensors im hitting the header with the housing of the fan... i think it will be fine im gonna ride a day with it and see.

 

thats exactly how mine was.

I see this thread coming soon:

"WTB:05 636 radiator ASAP"

 

http://www.youtube.com/watch?v=r_4a4O7kXQo. This **** will hold nething!!!!! LMAO.

 

haha gotta watch the slap chop dub! its the best

 

<object style="height: 344px; width: 425px"><param name="movie" value="http://www.youtube.com/v/Yaw7qX_ZDNE"><param name="allowFullScreen" value="true"><param name="allowScriptAccess" value="always"><embed src="http://www.youtube.com/v/Yaw7qX_ZDNE" type="application/x-shockwave-flash" allowfullscreen="true" allowScriptAccess="always" width="425" height="344"></object>