I've been having some issues that started about 10 minutes after a lowside, and was wondering if anyone has had an issue like this. I don't know if it was due to the lowside or just a coincidence, but I don't know what the ****. When the lever was fully out, the clutch was still only half engaged. It started feeling like my clutch was slipping, so adjusted it at the clutch arm by loosening it. All was well, rode for like an hour, back to slipping. I loosened it some more, everything was fine for another hour. Same thing happens again. I loosen it again, same **** happens, then do it once more, same **** happens after another hour. The nuts were at the end of the threads by this point, so I was out of room to loosen it. I took one of the nuts off the adjuster to get those few extra mm of slack, and now it's slipping again. I'm now completely out of room to adjust the clutch, so I'm pretty much fucked. Has this happened to anyone else? Any ideas on how to fix this? I really hope my clutch isn't completely toast, but it was just odd that if I kept loosening that cable it would work for a short period of time after. I figured if the clutch was gone that wouldn't happen at all.