ok puting my 03-04 motor on my golf cart and i was wondering if i can use pod filters instead or something other than the bulky air box? if so please tell me how and let me know what to do about the fuel line and everything

 

if there is no way to do it let me know want to work on this asap

 

as far as strait filters ..i dont see a problem. tee of the case vents just like a clean air mod..and get the right size filters to match up to the throttlebodies...

now the fuel line and pump.. prolly gonna have to either use the stock tank and mount it some where or make a fuel cell and mount the pump under that with a good gasket...you can also look into a universal fuel pump and run it off a fitting going to a cell. prolly gonna have to take your stock line and have a longer one made with those type of fittings at least on the throttle body end depending on what type of pump u run. good luck

 

Post pics/video of the progress or when you are done.

 

Ok I am using the stock rr gas tank but without the air box that top fuel rail thing won't be there so the gas line won't book up also what are the point of the injectors in the airbox and it won't hurt not to have them?

 

youll lose some topend power. should run though. those secondaries are in there to help keep the afr's as the motor climbs into those crazy rpms ...10k and above

u might be able to use a bigger main injector but idk..id have to do some research.. my advise..get a power commander.. hook it up to a laptop and adjust the afr's live...and see where u can get it

 

Recently had a buddy do this same thing with an F4i motor.

If you can make room for the stock air box you will make your life much easier.

 

thats what im doing gonna cost to much for pod filters and dont wanqa lose power will post pics of progress tonight