Im sure this has been asked alot, but what wire do i need to mess with for the tip over mod, i took off the front fairing and now the bike wont start and i was told it was cuz the tip over sensor, let me know.

 

dont remember the color but you connect the two outside wires together leaving the middle wire hanging

 

Use the search icon, Type in F4i tip over mod

 

cut/strip and connect red to green leave the white plugged in...

That had me stumped for about a day until I rembered the tipover sensor lol

 

Or use 10 brain cells and read the sticky in the "HELP AND HOW TO" section...

https://www.stuntlife.com/forums/443...er-sensor.html

 

the search button works wonders

 

with the upper cowl off the harness to the tip over sensor is not there. Normally you can do this at the tip over sensor...but because it is removed ..you have to find the wires at the grey harness connector. Connect the outside wires together and leave the middle.


Its too bad these douche bags wont just tell you whats up versus being retarded and telling you to use the search....


at least OMR is willing to help! He is right...just find those wires and connect the outside ones together.. Should be good to go! Good luck!

 

I thought I told him what to do... darn my squid self failed again!

 

I got this(tip over mod)#1 get off bike,#2 walk to the side,#3 kick the bike,#4 tip over mod complete,any more questions?

 

I gotta agreee with Blee that is the tip over mod, but thanks everyone i didnt think to use the search button, will do next time.