636 HELP!!! or its for sale!!!
04-26-2009, 09:04 PM
#23
it finally quit raining!!
Thread Starter
Join Date: Nov 2008
Location: Lima, ohio
Age: 38
Posts: 127
Re: 636 HELP!!! or its for sale!!!
ur ***** not making any sense.... no wait... ur not making any sense and dont try to explain it again.
1. plug the fuel pump p, unplug the line from the rail an put it in a water bottle. turn the key and if fuel comes out then ur good to go on the harness. runing power to the pump tells u the pumps working but still makes u kick yourself in frustration.
2. have u over ride the tip sensor yet? if not u may need to replace it! hapened on my 05 gsxr 750, that shat sounded fine but was bad, bike turned on then turned right off on sometime not at all. just cus its in the right place dont mean ****
3. coil: power black w/ yellow stripe
4. check ALL of your fuses
5. try the old ecu, my harness pinches n bike wuldnt do anything but turn signals n dash lights, hit the dealer mode n it threw every code but the kick stand. ecu shorted out but there are other things to short out. maybe u bought a bad ecu?
6. does ur f1 light blink or stay on?
7. how do YOU know u dont have spark?
1. plug the fuel pump p, unplug the line from the rail an put it in a water bottle. turn the key and if fuel comes out then ur good to go on the harness. runing power to the pump tells u the pumps working but still makes u kick yourself in frustration.
2. have u over ride the tip sensor yet? if not u may need to replace it! hapened on my 05 gsxr 750, that shat sounded fine but was bad, bike turned on then turned right off on sometime not at all. just cus its in the right place dont mean ****
3. coil: power black w/ yellow stripe
4. check ALL of your fuses
5. try the old ecu, my harness pinches n bike wuldnt do anything but turn signals n dash lights, hit the dealer mode n it threw every code but the kick stand. ecu shorted out but there are other things to short out. maybe u bought a bad ecu?
6. does ur f1 light blink or stay on?
7. how do YOU know u dont have spark?
04-26-2009, 11:50 PM
#25
Thread Killer!!!
Join Date: Jan 2005
Location: kosciusko, MS
Age: 47
Posts: 1,479
Re: 636 HELP!!! or its for sale!!!
I got an ecu and a relay box if you end up wanting to try another set.
$40 shipped
I had the same problem one time and ended up being the tip over too. Just bypass it and eliminate that problem.
Remember when your checking whats hot and whats not, sometimes switches complete the path to ground, not connect power.
$40 shipped
I had the same problem one time and ended up being the tip over too. Just bypass it and eliminate that problem.
Remember when your checking whats hot and whats not, sometimes switches complete the path to ground, not connect power.
04-27-2009, 11:42 AM
#26
it finally quit raining!!
Thread Starter
Join Date: Nov 2008
Location: Lima, ohio
Age: 38
Posts: 127
Re: 636 HELP!!! or its for sale!!!
I got an ecu and a relay box if you end up wanting to try another set.
$40 shipped
I had the same problem one time and ended up being the tip over too. Just bypass it and eliminate that problem.
Remember when your checking whats hot and whats not, sometimes switches complete the path to ground, not connect power.
$40 shipped
I had the same problem one time and ended up being the tip over too. Just bypass it and eliminate that problem.
Remember when your checking whats hot and whats not, sometimes switches complete the path to ground, not connect power.
and i did check all plug ins like 10 times and all fuses are good i replaced them all.
EVERYONE KEEPS SAYING BYPASS TIP SENSOR I DONT KNOW HOW I SEARCHED AND NOTHING FOR MY BIKE. IT HAS 3 WIRES ONE BLUE THAT HAS POWER GOING TO IT AND ONE BROWN AND ONE BLACK? ANY HELP IN THIS ONE WOULD BE SWEET THANKS FOR ALL THE INFO.
04-27-2009, 12:55 PM
#27
Thread Killer!!!
Join Date: Jan 2005
Location: kosciusko, MS
Age: 47
Posts: 1,479
Re: 636 HELP!!! or its for sale!!!
ECU and Relay box came form an 05 636.
Just let me know no biggie either way.
On the bypass, I cant remember about which wires I did what with its been a long time, sorry.
Good Luck tho
Just let me know no biggie either way.
On the bypass, I cant remember about which wires I did what with its been a long time, sorry.
Good Luck tho
04-27-2009, 01:45 PM
#28
Registered User
Join Date: Dec 2008
Location: newark,ca
Posts: 85
Re: 636 HELP!!! or its for sale!!!
i have had the same problem the diode inside the ignition lock which is located under the ignition key goes bad...once it goes bad it will not give power to fuel pump to prime...so no prime no fuel pressureso no pressure no ignition...hahaha i hope its helps
04-27-2009, 01:45 PM
#29
Registered User
Join Date: Dec 2008
Location: the roads less traveled
Posts: 462
Re: 636 HELP!!! or its for sale!!!
hahahaha i just wrote a whole rant about gsxrs n remebered ur problem is a 636 hahaha.
blue n brown go together, blacks ground but dont just do it yet, if u paperclip it u may have problems maybe not, on a 04/05 gsxr it can shurt out the ecu. on that bike u gotta use actual resistors. for ur 636 rather then search, pm old man roger and ask him how he did his.
a relay is normally bad when it just gives you a click but no function for what it controls.
if ur ecu clips are busted, ionno i wouldnt use it, just ebay it on outta there and acknowledge that its got broken clips and untested.
blue n brown go together, blacks ground but dont just do it yet, if u paperclip it u may have problems maybe not, on a 04/05 gsxr it can shurt out the ecu. on that bike u gotta use actual resistors. for ur 636 rather then search, pm old man roger and ask him how he did his.
a relay is normally bad when it just gives you a click but no function for what it controls.
if ur ecu clips are busted, ionno i wouldnt use it, just ebay it on outta there and acknowledge that its got broken clips and untested.
04-27-2009, 01:48 PM
#30
da fiddy bitches!!!
Join Date: Feb 2004
Location: Austin, Tx
Age: 38
Posts: 15,819
Re: 636 HELP!!! or its for sale!!!
ya i might get them from ya im trying to find another running 05 06 636 to plug my 2 in and find out if thats the problem? ill let ya know. what did yours come off of?
and i did check all plug ins like 10 times and all fuses are good i replaced them all.
EVERYONE KEEPS SAYING BYPASS TIP SENSOR I DONT KNOW HOW I SEARCHED AND NOTHING FOR MY BIKE. IT HAS 3 WIRES ONE BLUE THAT HAS POWER GOING TO IT AND ONE BROWN AND ONE BLACK? ANY HELP IN THIS ONE WOULD BE SWEET THANKS FOR ALL THE INFO.
and i did check all plug ins like 10 times and all fuses are good i replaced them all.
EVERYONE KEEPS SAYING BYPASS TIP SENSOR I DONT KNOW HOW I SEARCHED AND NOTHING FOR MY BIKE. IT HAS 3 WIRES ONE BLUE THAT HAS POWER GOING TO IT AND ONE BROWN AND ONE BLACK? ANY HELP IN THIS ONE WOULD BE SWEET THANKS FOR ALL THE INFO.
you break open the box, remove the pendulum, close it and plug it up
04-27-2009, 02:42 PM
#31
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Thread
Thread Starter
Forum
Replies
Last Post
pornstaR6
Bikes for Sale
4
11-14-2012 04:56 AM
