Was looking for help with getting the Gixxer 600 set up to stunt. My buddy's bike has the cage, bar, and 56 tooth sprocket already. Is there an idle mod for this bike (and what cable works best?), clean air mod, a way to get rid of the throttle lag, or anything else that is good to help the bike out?

Thanks in advance.
Buz

 

check out teamstepitup.com go register and hit the forumslots of mods for the k6 gix

 

only thing to do and it's free is remove the clutch switch and let it hand out of the way. It give the bike more pep and if you don't think so put the switch in a spot that you can get to and ride the bike at about 30 and push the switch in and watch what the bike does.

 

Where is the clutch switch and what does it look like?

 

Thanks bro. I am heading there right now.

 

i heard u can get a special power commmander setup so u can set ur GSXr
to 600-750- or 1000 now!!!!!!!!!!!!!!!!!

check d-bag on craigslist he has a stunt school not just for gixxer riders but other squids too..

 

http://www.tfriders.com/phpBB3/viewtopic.php?f=9&t=71

 

 

it's not a joke I have 3 of these damn 07-08 and when i was first told this from ED i just about laughed my *** of and said yeah right. Then good ol bob came over and had his damn switch hanging and i took that bitch for a ride and sure as **** is does work. The switch retards timing when you let the clutch lever out! I have done dyno runs with it hooked to the lever and with out and more TQ with the damn thing hanging. Go ride one and try it, it only held on by one screw under the lever. you will not be laughing then

 

for the idle screw, if you look on the left side up in the engine, youll see the throttle cables and what not. theres a over sized bolt/****. that needs to be taken out and the idle screw cable goes there.

 

So.... can he use a 600rr cable? or is the Zuki a diff size?

 

is there anywhere to get step by step on this **** cuz im dumb as **** and dont even know whats going on lol oh and does that clutch thing work on the 06

 

I used one off a zzr and it works awesome

 

Sweet, Thanks bro.

 

Welcome to the club of trying to find out what the **** to do with these.... Damnit! Next time I'm buyin a pre-prepped 636. Stupid Gix

 

so im gonnalook on ebay for this cable what cable isit though???

 

ok, this is what u do:
1. remove clutch switch (u have to jump-wire it)
2. remove set valve.
3. clean air mod (just block de hose that goes from the airbox to the pair valve)
4. carefully remove the secondary throtle butterflys (by doing this u gonna have a consistant and strong idle and that thing its going to be smooth as hell.
5. get a T.R.E. (timming retard eliminator) to trick ecu in to 6 gear.

#4 is very important since thats the main cause of inconsistant and weak idle on gixxers.

 

what do you mean by removing the secondary throttle butterflys ? i know the SET valve helped me a bunch with my idle **** is smooth as **** now, but give a bit more info on the throttle butterflyes pics if possible

 

#1,3,5 - easy......... but can you give links, pics, or a more in depth how to for #2 and #4?

 

ive never done the set valve,clean air mod.or removed the secondary butterflys or do i have a t.r.e.,and my idle is gangster