Calling aLL NY stunters and stunteresses
I ♥ uR mOm
Joined: Feb 2008
Posts: 1,968
From: South East PA
Re: Calling aLL NY stunters and stunteresses
ive only had DB for the lot, im trying out clip ons too. just not sure if i want vortex to keep a closer to stock height or SI or somthing to get a rise......? 
RR OR 05+ R6/R1 radial mc...... ive been using the R6/R1 and been pretty happy with it.
i'm keeping that on my S.M..... now have a magura 13mm to go with my HHD big rotor kit on order for my new build for my R6. im looking forward to that set up!!!
yeah blue's a nice spot!! i like bear creek too. i gotta get out this year. its been like 7+ years since i went boarding. i used to go all the time. i gotta get a new board and get back in the game!!!
i'm keeping that on my S.M..... now have a magura 13mm to go with my HHD big rotor kit on order for my new build for my R6. im looking forward to that set up!!!
Im down...
And for you guys wanting to get a mega snow session together... lemme know. I got hookups at some mountains down here..
Blue mountain is your best bet down here. Largest and offers the most stuff.
www.skibluemt.com
And for you guys wanting to get a mega snow session together... lemme know. I got hookups at some mountains down here..
Blue mountain is your best bet down here. Largest and offers the most stuff.
www.skibluemt.com
Soup Mafia
Joined: Sep 2006
Posts: 7,916
From: Vero Beach, Fl USA
Re: Calling aLL NY stunters and stunteresses
bp chaser
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
Zippy Tie Rider
Joined: Mar 2009
Posts: 3,408
From: Florida
NealFoReal
Joined: Oct 2006
Posts: 36,000
From: QUEENS, NY BITCHES
Zippy Tie Rider
Joined: Mar 2009
Posts: 3,408
From: Florida
Re: Calling aLL NY stunters and stunteresses
My bike still isn't done, tires dead, and it's not registered yet. I need to get it on the street before I can turn into Sam. Last edited by Tone The Natural; Dec 10, 2009 at 11:11 AM.
Registered User
Joined: Nov 2006
Posts: 1,574
From: Upstate NY
Re: Calling aLL NY stunters and stunteresses
MikeM or Inolen what do I do for the Kleen air mod on this 636..I know to use the search and I did but i was counting on pictures and there not showing up for me...so what do I do?
NealFoReal
Joined: Oct 2006
Posts: 36,000
From: QUEENS, NY BITCHES
Re: Calling aLL NY stunters and stunteresses
https://www.stuntlife.com/forums/443...=kleen+air+mod
and here's an easier shorter thread w pics
https://www.stuntlife.com/forums/2-s...=kleen+air+mod
Registered User
Joined: Apr 2003
Posts: 5,046
From: stuntbums hq
Re: Calling aLL NY stunters and stunteresses
Go pick up 2.5 ft or so of 1/2" fuel hose.
Go to home depot's hardware section and in the misc. drawers next to the nuts and bolts and look for I think they're called screw/bolt covers. They look like this:
I think you need one yellow and one gray one. I always just pick up a couple of them and put on whatever ones fit.
Go home, take off your airbox and disconnect the 2 hoses running to the airbox. Disconnect the other ends of the hoses from the motor, and run that 2.5 ft of fuel house to where they were connected on the motor. Take the rubber covers and place them on the airbox where the hoses used to attach. Now go back to the T where the one big hose was connected and you'll see a tiny hose running out of the bottom of the T, disconnect that hose from the T and put a small screw in it.
Go to home depot's hardware section and in the misc. drawers next to the nuts and bolts and look for I think they're called screw/bolt covers. They look like this:
I think you need one yellow and one gray one. I always just pick up a couple of them and put on whatever ones fit.
Go home, take off your airbox and disconnect the 2 hoses running to the airbox. Disconnect the other ends of the hoses from the motor, and run that 2.5 ft of fuel house to where they were connected on the motor. Take the rubber covers and place them on the airbox where the hoses used to attach. Now go back to the T where the one big hose was connected and you'll see a tiny hose running out of the bottom of the T, disconnect that hose from the T and put a small screw in it.
Registered User
Joined: Nov 2006
Posts: 1,574
From: Upstate NY
Re: Calling aLL NY stunters and stunteresses
Go pick up 2.5 ft or so of 1/2" fuel hose.
Go to home depot's hardware section and in the misc. drawers next to the nuts and bolts and look for I think they're called screw/bolt covers. They look like this:
I think you need one yellow and one gray one. I always just pick up a couple of them and put on whatever ones fit.
Go home, take off your airbox and disconnect the 2 hoses running to the airbox. Disconnect the other ends of the hoses from the motor, and run that 2.5 ft of fuel house to where they were connected on the motor. Take the rubber covers and place them on the airbox where the hoses used to attach. Now go back to the T where the one big hose was connected and you'll see a tiny hose running out of the bottom of the T, disconnect that hose from the T and put a small screw in it.
Go to home depot's hardware section and in the misc. drawers next to the nuts and bolts and look for I think they're called screw/bolt covers. They look like this:
I think you need one yellow and one gray one. I always just pick up a couple of them and put on whatever ones fit.
Go home, take off your airbox and disconnect the 2 hoses running to the airbox. Disconnect the other ends of the hoses from the motor, and run that 2.5 ft of fuel house to where they were connected on the motor. Take the rubber covers and place them on the airbox where the hoses used to attach. Now go back to the T where the one big hose was connected and you'll see a tiny hose running out of the bottom of the T, disconnect that hose from the T and put a small screw in it.
bp chaser
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
bp chaser
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
Re: Calling aLL NY stunters and stunteresses
Ok so from what I can tell, in stock form, the crankcase and the valve cover both vent into the airbox. By doing this mod, you basically just connect the 2 vents to each other. I wonder what happens to the pressure that builds up inside the engine.
KING annoyingeric
Joined: Jan 2007
Posts: 1,275
From: Queens
Re: Calling aLL NY stunters and stunteresses
On cars its bad. Pressure gets built up and you can start blowing seals out. Thats why most will just run a filter off the pcv valves. Im not going to do the clean air mod on my f4i. I'm going to plum the hoses into a sperate canister. With a slight hole poked in top. That'll save the oil from going into the throttle bodies and not let it spill out onto the ground if i use a filter.
