Calling aLL NY stunters and stunteresses
Zippy Tie Rider
Joined: Mar 2009
Posts: 3,408
From: Florida
Re: Calling aLL NY stunters and stunteresses
Yo this **** is Fire. Neal you should 100% use this for your next video.
http://www.youtube.com/watch?v=L5YcTytXjso
http://www.youtube.com/watch?v=L5YcTytXjso
Registered User
Joined: Jun 2009
Posts: 523
From: new york
Re: Calling aLL NY stunters and stunteresses
You are so right...... Getting back on Immediately is the best policy.. I was being a *****.
I'm working on getting a van or truck. So I'm putting in the overtime at my jobs so yeah, it has been 3 weeks, but don't get it twisted... Ur not gonna be able to **** with me. Don't let them gas u up son... I had a ***** episode.. yes... but it WILL NOT happen again. You're better off targeting PeeRock or someone. lol
I'm working on getting a van or truck. So I'm putting in the overtime at my jobs so yeah, it has been 3 weeks, but don't get it twisted... Ur not gonna be able to **** with me. Don't let them gas u up son... I had a ***** episode.. yes... but it WILL NOT happen again. You're better off targeting PeeRock or someone. lol
NealFoReal
Joined: Oct 2006
Posts: 36,000
From: QUEENS, NY BITCHES
Re: Calling aLL NY stunters and stunteresses
Yo I've never used AIM before and got a question. If I log on and it says someone is available and then I send them a message and it says they're idle but I keep typing anyway. Then 2 minutes later I hear the door close sound and it says they are offline - does that mean they saw the message and disconnected from AIM? I'm assuming thats what that meant 
I'm trying to get in touch with someone from on here and his AIM is all I got and he hasnt logged on to SL in a while. ******. So did he just basically ignore me and then disconnect???
I'm trying to get in touch with someone from on here and his AIM is all I got and he hasnt logged on to SL in a while. ******. So did he just basically ignore me and then disconnect??? 
bp chaser
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
Re: Calling aLL NY stunters and stunteresses
Yo I've never used AIM before and got a question. If I log on and it says someone is available and then I send them a message and it says they're idle but I keep typing anyway. Then 2 minutes later I hear the door close sound and it says they are offline - does that mean they saw the message and disconnected from AIM? I'm assuming thats what that meant I'm trying to get in touch with someone from on here and his AIM is all I got and he hasnt logged on to SL in a while. ******. So did he just basically ignore me and then disconnect???
I'm trying to get in touch with someone from on here and his AIM is all I got and he hasnt logged on to SL in a while. ******. So did he just basically ignore me and then disconnect??? 
Group Moderator
Joined: Sep 2004
Posts: 22,023
From: PA
Re: Calling aLL NY stunters and stunteresses
Yo I've never used AIM before and got a question. If I log on and it says someone is available and then I send them a message and it says they're idle but I keep typing anyway. Then 2 minutes later I hear the door close sound and it says they are offline - does that mean they saw the message and disconnected from AIM? I'm assuming thats what that meant I'm trying to get in touch with someone from on here and his AIM is all I got and he hasnt logged on to SL in a while. ******. So did he just basically ignore me and then disconnect???
I'm trying to get in touch with someone from on here and his AIM is all I got and he hasnt logged on to SL in a while. ******. So did he just basically ignore me and then disconnect???Could mean anything. My aim is always on but i never pay attention to it... my AIM goes to my cell to so if you IM me it goes to me as a text too...
NealFoReal
Joined: Oct 2006
Posts: 36,000
From: QUEENS, NY BITCHES
Re: Calling aLL NY stunters and stunteresses
could mean alot of things... alot of people i know have their AIM start up with their computer so they are on allllll the time but idle.
Could mean anything. My aim is always on but i never pay attention to it... my AIM goes to my cell to so if you IM me it goes to me as a text too...
Could mean anything. My aim is always on but i never pay attention to it... my AIM goes to my cell to so if you IM me it goes to me as a text too...
i'm trying to get info on putting this gsxr front end on using the gsxr triples. This is what he sent me by PM's but this is when I was planning on using the 929 upper that I had. Your lower bearing is fine (although i replaced the lower bearing with the tapered all ***** bearing and race) For the top bearing i used a 6906-2RS i got off of ebay. I have an extra i can ship you for like 5 bucks if you need it. The bearing size is 30x47x9
Other than that i did have to mod a few minor things. The steering stops have to ground off and relocated. I Just drilled and tapped for two 10mm bolts and used those as steering stops. The stock upper bearing and race are somewhere near 14mm thick... So when i took the stock upper race out i ground it down to about 4.5mm and put it back in and put the bearing on top of it. You need the bearing to stop just about at the bottom of the threads but not covering any of the threads at the bottom of the lower triple.
After all that it just goes right in. ... Easier said than done heh? If you have any other questions just hit me up man id be glad to help.
I did everything myself ground the spacer down with a belt sander and magnet to hold it. Then used a set of 30 dollar digital calipers i got from Lowes to measure.
So when i took the stock upper race out i ground it down to about 4.5mm and put it back in and put the bearing on top of it
Other than that i did have to mod a few minor things. The steering stops have to ground off and relocated. I Just drilled and tapped for two 10mm bolts and used those as steering stops. The stock upper bearing and race are somewhere near 14mm thick... So when i took the stock upper race out i ground it down to about 4.5mm and put it back in and put the bearing on top of it. You need the bearing to stop just about at the bottom of the threads but not covering any of the threads at the bottom of the lower triple.
After all that it just goes right in. ... Easier said than done heh? If you have any other questions just hit me up man id be glad to help.
I did everything myself ground the spacer down with a belt sander and magnet to hold it. Then used a set of 30 dollar digital calipers i got from Lowes to measure.
So when i took the stock upper race out i ground it down to about 4.5mm and put it back in and put the bearing on top of it
He hasnt been on here in months and I found his AIM under his profile but I cant get in touch with him. Been tryin for a few days already 
Last edited by OnEWhEeLNEAL; Nov 23, 2009 at 08:35 PM.
bp chaser
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
Re: Calling aLL NY stunters and stunteresses
I'm just trying to figure out since I have the complete front end with the upper and lower triple - can I use the bearings and race from the gsxr front end or do I still need to order the bearing he mentioned. And do I need to order a different bearing for the lower or do I just use the stock bearing from the F4i
He hasnt been on here in months and I found his AIM under his profile but I cant get in touch with him. Been tryin for a few days already NealFoReal
Joined: Oct 2006
Posts: 36,000
From: QUEENS, NY BITCHES
Re: Calling aLL NY stunters and stunteresses
NealFoReal
Joined: Oct 2006
Posts: 36,000
From: QUEENS, NY BITCHES
Re: Calling aLL NY stunters and stunteresses
Off to the garage to get **** ready for when Sam gets here. Iono why he's even putting a subcage on his bike considering he never rides the bitch anyway
bp chaser
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
