1000rr front end.
1000rr front end.
So I just coped a 06 1000rr front end and was wondering if there is anything different I should know about it then the 929/954. I run a 954 front end now but picked up the 1000rr for a REALLY good deal. Do I use the 1000rr bearings and lower triple? And will my hohey top triple still work with GPR? It all looks about the same but I figured Id ask to be safe. Thanks
Re: 1000rr front end.
you need to run the 929/954 lower triple with the hohey,and yes the gpr will still work...and the 1000rr forks are really short..so you have to drop them abit to get the closest to stock height you can...
Re: 1000rr front end.
Thanks Havok. I measured the forks and they are the same as the 954. Also do I use the 954 bearings or will the 1000rr
Re: 1000rr front end.
And the seals like to blow
Re: 1000rr front end.
Ok guys, got it all set up and looks good except the front wheel being black (oh well for now). Thanks for the help and on a side note for future reference, If you go from 954 front master to 1000rr front master you might need a slightly longer brake line that goes to the left caliper. Well at least I did.
Re: 1000rr front end.
My friend just got a brand new 1000rr
He has been rinding about 10-15 years, onyl does freeway wheelies, NO stunt riding, always sets his wheelies down gently.
He blew his seals out in under 500 miles, both of em shot
And hes been riding the same 929's for years, never blown any seals











