need help quick
need help quick
im in st louis for roc and my bike is ****** up real bad. i got an 06 636 never had any sorts of problems before, bike is still crispy. im riding on the highway during the ride and i notice that my bike wont go below 4300 rpms but i havent touched the idle adjuster. that goes on for awhile then we stop at a gas station and i turn the bike off and get gas and back on and its idling fine but when i get back on the highway the ****** bike wont take more than a 1/4 of throttle. like it reacts pretty normally just taking off and stuff but if i try to clutch up its like something is stopping it from revving when i give it a full twist of throttle. i opend the airbox and took it off and i cant see anything stuck in the throttle bodies or anything. any idea wtf is going on?
Re: need help quick
I don't know what it could be, but here are a few things to check:
Make sure fuel line is on good, not kinked.
Make sure throttle bodies are seated well on the head.
Make sure your map sensor is plugged up on the front of the airbox.
Make sure none of your vacuum tubes on the throttle bodies are unhooked.
The weird noise might be your secondary flaps. When you take the airbox back off, hold the throttle open and turn the switch on and look down in there and see what's going on.
Again, I have no clue, but those are easy and free things to check.
Make sure fuel line is on good, not kinked.
Make sure throttle bodies are seated well on the head.
Make sure your map sensor is plugged up on the front of the airbox.
Make sure none of your vacuum tubes on the throttle bodies are unhooked.
The weird noise might be your secondary flaps. When you take the airbox back off, hold the throttle open and turn the switch on and look down in there and see what's going on.
Again, I have no clue, but those are easy and free things to check.
Thread
Thread Starter
Forum
Replies
Last Post
trabich
Bikes for Sale
1
Nov 17, 2012 12:15 PM








