brembo 16x18
What happened to my blox?
Joined: Jun 2006
Posts: 13,412
From: THE LEFT COAST
Re: brembo 16x18
been there done that with a 06 gixxer 6 front lever.
the problem with all the front brake masters from streetbikes is they have a LARGE bore size which is meant to be compressing into 2 seperate volumes (2 calipers) and when you switch it to handbrake it's hard as hell to squeeze, arm pump like crazy because you're making it squish only one caliper out
I rode with mine for 8 or 9 months (wish I had the brembo off the gate) don't get me wrong they work, but you'll get to a point where your skills will exceed the ability of that master. running a finger on clutch and a finger on the brake was a joke with that lever way too hard
the reason the brembo is sooo good is it's bore is 16x18 and it's real purpose is for the front of a race motard bike that uses only 1 caliper. make sense? I LOVE MY BREMBO and there is no looking back. basically any 16mm radial will work perfect and brembo happens to be the most reasonably priced model.
the problem with all the front brake masters from streetbikes is they have a LARGE bore size which is meant to be compressing into 2 seperate volumes (2 calipers) and when you switch it to handbrake it's hard as hell to squeeze, arm pump like crazy because you're making it squish only one caliper out
I rode with mine for 8 or 9 months (wish I had the brembo off the gate) don't get me wrong they work, but you'll get to a point where your skills will exceed the ability of that master. running a finger on clutch and a finger on the brake was a joke with that lever way too hard
the reason the brembo is sooo good is it's bore is 16x18 and it's real purpose is for the front of a race motard bike that uses only 1 caliper. make sense? I LOVE MY BREMBO and there is no looking back. basically any 16mm radial will work perfect and brembo happens to be the most reasonably priced model.
.-mexican mayhem
WWW.IDOLRIDERS.COM
Joined: Mar 2006
Posts: 1,148
From: Sacramento, Ca, USA, Earth
Re: brembo 16x18
+100000000 I thought my gixxer master was good too till I actually rode with one. now I don't know how I rode without one. only had one practice and a 2 day show on it so far and I LOVE IT. no looking back
back in the saddle again
Joined: Apr 2003
Posts: 7,322
From: terre haute, IN
Re: brembo 16x18
i don't doubt that they are good....but i'm looking at cost/use ratio here. my 14mm is powerful as can be so the 16x18 can't be any more powerful. the only thing it can win at is smoothness, which, because of superior workmanship it probably is, but i doubt enough that i would notice a difference. i would benefit more with using mine and getting better than putting a brembo on, in all honesty.
Registered User
Joined: Nov 2004
Posts: 2,277
From: South of Boston, 781
Re: brembo 16x18
i've got a used 16/18 brembo that i'll let go for $175 shipped!!!
And it's not the power of the brembo's that is so good... it's the combined power and progressive feel/smoothness/modulation that makes them so good.
They're not ON or OFF like most of the smaller bore masters out there. Any hb will bring ya down from a spreader or HC... the brembos are very good when ur workin on hb circle combos and off the pegs coasters... that's when u'll appreciate em most.
And it's not the power of the brembo's that is so good... it's the combined power and progressive feel/smoothness/modulation that makes them so good.
They're not ON or OFF like most of the smaller bore masters out there. Any hb will bring ya down from a spreader or HC... the brembos are very good when ur workin on hb circle combos and off the pegs coasters... that's when u'll appreciate em most.
Last edited by kj; Aug 23, 2007 at 09:47 PM.
Thread
Thread Starter
Forum
Replies
Last Post
sickeazy
Bikes for Sale
5
May 4, 2014 11:15 AM
