I want to flip the stock clipons, Should I mount them over or under the triple? f4i/929front.

and if anybody has some aftermarket 929 clipons for sale, hit me up

 

stock on 929 is below the triple you can mount them above just make sure they are tight as ****

 

mike can you post pics of flipped clip ons?? what good does it do?

and can it do good for everyday riding and not stunting?

 

This is how im going to try them. If you flip them and leave them below the triple theyre rediculously low

 

Wow that looks crazy

 

So do you have to lower the front of the bike so the forks are higher to mount the clipons on top of the triple?

 

dont flip them just put them ontop of the triple...that way it gives u liek a 3 inch rise

wher eu seriously tucking into hc with them in the stock position...if so how the ****

 

reminds me of a cafe racer kinda

 

wow those kinda **** cause if you leave them stock they have the downbend and if you flip them they have that up-side-down rise that puts them really low.

Mike, find out what size the forks are, most up-side-down setups are 50mm (GSXR's, 636, zx-10 just to name a few) If they are 50mm then ANY 50mm aftermarket clipons will work, and you can flip them and they will be haigher than those, even UNDER the triple... ill bet you can find a set on e-bay, if not hit up Freestyle Ing. and tell them who you are and they'll probably give you a decent discount on a set of ) degrees!

 

i was tucking through with the f4i front end with stock clip ons turned out. that reminds me its time for me to stretch


here is over the triple, not flipped. they're like apehangers up there, way too high

 

Doesnt it look like my fender and tank match? The fender is dark red, the tank is light orange. strange

 

dude... 17 k post????

 

He's a very lonely guy

 

I have vortex clip ons on my 954 and if I flip them the angle up is dumb.

MikeM if you want them pm me an offer, I think I might get the FI zero chit.

 

Go change some diapers!

 

Can you send me a pic of them?
mikem631@gmail.com

On or off the bike, doesnt matter

 

if you turn out the stock f4i clips, do you cut away the 'thing' that holds them in position on the fork/triple? the metal part sticking out i mean!

 

Nah, just pull em up a bit.

 

you have mail Mike.

 

I just ran the vortex clip ons on that setup. That is the way to go.I just put DB bars on my F4I/929front end so I dont need them anymore.I got a new pair of black anodized ones w/ no scratches for ya.
I will most likely be able to take pics and put em up on ebay for a couple of bucks today(if that makes any sense to do?)or PM me during the day and I will let you know when I put em up with a buy now or something. Im not too good with this stuff.