need a 12 oclock bar
07-06-2006, 10:11 PM
#4
Registered User
Thread Starter
Join Date: Jun 2006
Location: Adams Wisconsin USA
Posts: 5
Re: need a 12 oclock bar
Originally Posted by Street Warrior
not really. powers has em and I'm almost positive freestyle does to.
07-07-2006, 06:44 PM
#5
Registered User
Join Date: Nov 2004
Location: Sunny SW Florida
Posts: 2,401
Re: need a 12 oclock bar
hmmm, I guess I was thinking that because it was an F2 that there were 12 bars for it, but it looks like the 91 has a different subframe than the other years 92-98 F2/F3 and it's welded on so you can't just bolt on a subframe from a different year? I guess try to figure out how the 91 is different from a 92-98 and mod it to accept a 92-98 12 bar, but it'd probably be easiest to just make your own 12 bar
07-09-2006, 04:54 PM
#10
Registered User
Join Date: Nov 2004
Location: Sunny SW Florida
Posts: 2,401
Re: need a 12 oclock bar
the 91 subframe has a different part number than the rest of the years F2/F3. what's different about it, I have no idea might want to call powers or 905 and ask. or try to find a local stunter in your area with a 92-98 F2/F3 and ask if he would let you look at his bike and take some measurements to see how it's different from yours.
might want to call powers or 905 and ask. or try to find a local stunter in your area with a 92-98 F2/F3 and ask if he would let you look at his bike and take some measurements to see how it's different from yours. 
07-09-2006, 09:51 PM
#15
Registered User
Join Date: Mar 2006
Location: hebron ct
Posts: 175
Re: need a 12 oclock bar
12 bars are easy to rebend. i have a 03 gixer 1000 bar on my 04 r6
if you hav access to a drill and a torch its nothing to do. just buy a 92
im sure you could make it work.. i think its easier then making one from scratch.
if you hav access to a drill and a torch its nothing to do. just buy a 92
im sure you could make it work.. i think its easier then making one from scratch.
07-10-2006, 01:21 AM
#16
Registered User
Join Date: Aug 2003
Location: ND
Age: 38
Posts: 619
Re: need a 12 oclock bar
i have a 91 f2. Subframe looks the same as my buddies 94 f2, and this other guys 97 f3. They are all steel, all welded to the frame, my 
is to build your own. You dont need a pipe bender or anything. Just buy some steel, and an angle grinder, mock it up and take it to somone to weld. The subframe is pretty low, so make sure the bar is about level with the top of the seat so it doesnt hit the bar and keep going back over.
is to build your own. You dont need a pipe bender or anything. Just buy some steel, and an angle grinder, mock it up and take it to somone to weld. The subframe is pretty low, so make sure the bar is about level with the top of the seat so it doesnt hit the bar and keep going back over. 
Thread
Thread Starter
Forum
Replies
Last Post
HateRR600
Stunt Bike Videos and Reviews
0
04-19-2013 11:32 AM
