stoppie distances??!!??!!??
B.T.M.
Joined: Feb 2004
Posts: 17,252
Re: stoppie distances??!!??!!??
Originally Posted by FSPalex
AM Jason taught me how to stoppie. i just decided that flipping was better and branched off into my own faction...
mike when the fvck are you coming out here to visit you d1ck
mike when the fvck are you coming out here to visit you d1ck
DEAD BABIES SYNDICATE
Joined: Nov 2004
Posts: 829
From: Conneci****, Flo-rida.
Re: stoppie distances??!!??!!??
150 foot approach= 300 ft for me, but thats with 2 blown seals and a rigged *** damper and an unbalanced front tire, oh yea and my pads are prolly shot from going through 2 sets of fork oil on each side
Thread Starter
1 footer wheelies!
Joined: Jan 2003
Posts: 1,632
From: Folsom, CA
Re: stoppie distances??!!??!!??
Originally Posted by BigBalla
hmmm sounds like its time to get a new Measure Master
hahah bring it. I was doing 650 at stuntwars in practice with sketch traction. out here it's no problem.
my little 636 has *****.
Registered User
Joined: Jan 2004
Posts: 854
From: Phoenix,Az
Re: stoppie distances??!!??!!??
you phil mad mike is rolling 600 from a 300 approach. He is only -1 +4 up on that r6. I told him he needs more gearing so i think he is going to add a few teeth. I think with the gearing he has now he is about tapped out for distance on that r6. he just cant get the speed that your 636 has.
ps. 636 for life dog. :YEAH
ps. 636 for life dog. :YEAH
I got nothin....... 
Registered User
Joined: Oct 2002
Posts: 1,441
From: HELLVIEW
Re: stoppie distances??!!??!!??
Originally Posted by Sillyneck
hahah bring it. I was doing 650 at stuntwars in practice with sketch traction. out here it's no problem.
my little 636 has *****.
my little 636 has *****.
Registered User
Joined: Aug 2004
Posts: 3,733
From: .......
Re: stoppie distances??!!??!!??
I just got me a rolling measuring wheel that clicks off the feet as you walk.........now I need to go steal some traffic cones from MoDOT!!!!
We guestimated my endoes to be over 200', problem is we have no clue how much over! Basically pulling em up behind a parked van and setting em down when I ran outta pavement!
was in middle of 2nd gear or high rpm in 1st, they felt pretty close to the same speed (stock front, +13 in the rear, no guages!)
I need an area with enough room for a 300' approach without rolling 50' then into a damn bush or concrete wall.
We guestimated my endoes to be over 200', problem is we have no clue how much over! Basically pulling em up behind a parked van and setting em down when I ran outta pavement!
was in middle of 2nd gear or high rpm in 1st, they felt pretty close to the same speed (stock front, +13 in the rear, no guages!)
I need an area with enough room for a 300' approach without rolling 50' then into a damn bush or concrete wall.
Registered User
Joined: May 2005
Posts: 251
From: post katrina destruction
Re: stoppie distances??!!??!!??
Originally Posted by MATT L
We were practicing 150ft approaches last weekend in Dallas, I was averaging between 300-350ft, and I agree that your gonna be off the brake most of the time to go much past 350-400, or have some sort of servo motor on your front wheel.
that faaaka is straight up
and down rollin some sick
endos!! no footers crazy ****!!
john gotti
squid hunter
Joined: Mar 2004
Posts: 2,079
From: connecticut
Re: stoppie distances??!!??!!??
Originally Posted by danherz
150 foot approach= 300 ft for me, but thats with 2 blown seals and a rigged *** damper and an unbalanced front tire, oh yea and my pads are prolly shot from going through 2 sets of fork oil on each side
Last edited by Trick; May 30, 2006 at 05:15 PM.
A.M STOPPIE SCHOOL
Joined: Jun 2004
Posts: 2,726
From: ATL , GA
Re: stoppie distances??!!??!!??
Ok, Jason And I Were At The Spot Tonight And The Average Is About 375 From 150 W/ Serious Tire Lockup On The Pickup. Our Spot Turned To **** Since The Construction Started... We Are Gonna Go To Our Offical Stoppie School Spot
An Get A Better # For U Peeps :YEAH
An Get A Better # For U Peeps :YEAH 
