man i got alot play in my stering stem i think my bearing or gone i was thinkin of gettin the bbr ones, is there somthin else in there i need to replace to make it quit movin, and how do i do it , only tell if you know for sure

 

I would say you should be able to get away with tighting it before you would have to replace any bearings. You just have to loosen triple clamp nut use a drift and tighten nut below and retighten triple clamp nut.
I have replaced my bearings only because I got the Sano frame and it did not come with bearings. No big deal when driving the new races just make sure what ever you drive them in with doesn't make contact with the surface the ball bearings ride on.
Just my hope it helps.
Schwartz

 

Do yourself a favor and spend $35.00 on the sealed bearings.You will not have to think about it again

 

And where would somone get there hands on somthing like that for a 50. I'd love to spend my money on that option.
Thanks
Schwartz

 

Ron from xtremeracing50s.com has them.He has them on ebay or you can just call him direct his # is in the add. http://cgi.ebay.com/ebaymotors/ws/eB...tem=2456286203
Always expect excellent service form Ron.

 

Tank Q very much.

Schwartz

 

No problem.Tell him Jon from Petaluma CA sent ya!

 

Well Tapered berings anyway big improvement.Sorry about the sealed thing they are not.

 

i am goin to get those tapered cuz local shop wants 30 for stock so..... and i did tightn both the bolts and there is still alot play i am afraid to ride on jumps and try stopis cuz i think my stem might break

 

Good call its a great buy at $35

 

Im sure u already know this but just making sure...u have to loosen the top nut before u can tighten the thing under it, otherwise it wont get tight.