FIDDY TECH: Help, How-to, Parts & Mods Have a technical question? Looking for the best parts? Want to share some info on new fiddy parts you bought or have seen? Post it up here!

XR50 won't idle. Any ideas?

Thread Tools
 
Search this Thread
 
Old May 5, 2003 | 12:34 AM
  #1  
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 4
From: Tampa,fl
Kermy750 is an unknown quantity at this point
XR50 won't idle. Any ideas?

My XR50 run great but if you just let it idle it just dies. It has very low hours, like new. Must be something simple. What gives?
Old May 5, 2003 | 12:59 AM
  #2  
birddogg's Avatar
Registered User
 
Joined: Jan 2003
Posts: 137
From: Central PA
birddogg is an unknown quantity at this point
Try the idle adjustment screw?
Old May 5, 2003 | 01:19 AM
  #3  
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 4
From: Tampa,fl
Kermy750 is an unknown quantity at this point
It does not seem to make a difference. I'm still stumped.
Old May 5, 2003 | 02:14 PM
  #4  
Registered User
 
Joined: Apr 2003
Posts: 23
From: WA
cdteo is an unknown quantity at this point
I have this same problem with my new 50 it has less than 2hr. on it. I'm thinking that it's still tight and needs to loosen up before it will stay running.
Old May 5, 2003 | 04:49 PM
  #5  
Beef's Avatar
Regular StuntLifer
 
Joined: Jan 2003
Posts: 490
From: Minneapolis, Mn.
Beef is an unknown quantity at this point
I got the same problem with the one Shugga just gave me yesterday. My buddie has one and he said he would leave it half choke for a bit until the engine warmed up, then it was fine. I am going to go home tonite and dick around with mine.

Hey Shug!!!! What is this piece of **** you gave away. Just kidding man.

Lata
Old May 5, 2003 | 05:35 PM
  #6  
Rich-NY's Avatar
I Enjoy Posting At StuntLife!
 
Joined: Jan 2003
Posts: 1,003
From: LI, NEW YORK
Rich-NY is an unknown quantity at this point
mine did that also when I first bought it, give it some time. It'll go away.
Old May 5, 2003 | 10:45 PM
  #7  
_j0kA_'s Avatar
Registered User
 
Joined: Jan 2003
Posts: 213
From: Ontario, Canada
_j0kA_ is an unknown quantity at this point
right from the dealer mine idled fine and still does.. run's perfect, especially after putting the PC pipe on - nice tan colored plug..
Old May 6, 2003 | 01:40 AM
  #8  
Registered User
 
Joined: Nov 2002
Posts: 15
From: Lady Lake, FL
PyroMedic is an unknown quantity at this point
pull the carb out to the side and remove the bowl spray with somr carb cleaner then lubricate wd whatever then use some more carb or brakecleaner and reassemble it will work those mothers f's at honda just throw **** togeather and leave **** in there.
Old May 6, 2003 | 10:17 AM
  #9  
Beef's Avatar
Regular StuntLifer
 
Joined: Jan 2003
Posts: 490
From: Minneapolis, Mn.
Beef is an unknown quantity at this point
I took mine out last nite. Choked it for a 3 or 4 minutes. Once it warmed up, I adjusted the idle screw. Turned it up about a quarter turn. Idle problem gone and wasn't idling too high.

Everyone is gonna be different. Just gotta keep f...in' with it.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Eric318
XR50 & Minibike Forums
1
Jan 12, 2015 02:39 PM
SupraSmash
XR50 & Minibike Forums
0
Jun 11, 2014 05:31 AM
rappyf4i
General Sportbike Discussion
0
Mar 29, 2014 01:05 AM
iamjkennedy
Service, Repair, and Maintenance
6
Jan 26, 2014 07:33 PM
freestylemotox
General Sportbike Discussion
1
Jul 23, 2013 11:31 AM




All times are GMT -4. The time now is 08:43 AM.