I found a setup for bars a145 $. here it is

Sbfreak tripple clamp: 60$

Easyride bars form fast50:35$ (or maybe 12 bmx bars)

Red barron grips: 12$

Red barron plastic throttle: 25$

extended brake cable: 13$

Is that all ill need or will i need throtle cable to?

YOu may have to ad or subtract cause this is all of top of my mind, but will that all be compatable? like the bar width and the throttle and grips? And will the bar fit the triple clamp?

 

Im also 13 and on a strict budget. If you can get things cheaper plz tell me.

 

or if you can make one for cheaper or you just dont want your secret place geting out pm me. And if you have any of this stuff plz tell me how it is.

 

I got an idea off of 50ccracing.com I got a piece of 1/4 inch steel and bent it like theirs. Or u can buy it from them for $30. I'm 6'2" 200lbs and it works fine for me. Peace!!!!!!!!!!!!!!!

 

yea i saw that, but, ill bend the stockers from there original mounts, and with clamps all u gotta do is losen it and rea agange it.

 

Good idea

 

I just bent my bars forward.
Much better and free to do!
Maybe in time I'll get the big bars but they're fine the way they are for now.

Rob.

 

my boy has haro bars on aftermarket triple clamps

works great

 

i ordered a plate from jbaker on here for 30 bucks then won a BMX headset off ebay for a buck. hacksawed it and then had it welded on the plate....got a pair of bmx bars from the local shop (12 bucks) hack sawed one side of it off and hammered in the stock bar into it and then used the stock throttle setup so for around 50 bucks i was set. i have a diffrent setup now but thats all i could afford at the time...if you can't find a welder i had the 4 holes on the headset drilled through and through the plate and used long bolts and nuts

 

yea, maybe ill buy some cheap bmx bars, and mount on a trpile clamp.