Props To Ryan @ ESD!
11-04-2009, 02:01 PM
#1
Registered User
Thread Starter
Join Date: Mar 2009
Location: Lake Charles, LA
Posts: 239
Props To Ryan @ ESD!
Just wanted to say THANK YOU for the quick shipment of my stuff and hooking me up with the mod! Stuff shipped Friday from Cali and got a USPS notice at my house Monday. I had no clue I'd get it that fast, but picked it up yesterday from the PO and promptly installed the billet throttle, ran cable, installed new grips with the ProTaper bar ends. I still gotta clean the carb and hook up the throttle cable to it and hopefully it'll crank right up!
I'm really impressed with the bar ends and the billet throttle. Sick looking setup and looks like it came that way.
Thanks man!
I'm really impressed with the bar ends and the billet throttle. Sick looking setup and looks like it came that way.
Thanks man! 
11-04-2009, 06:01 PM
#2
Registered User
Join Date: Jun 2007
Location: Baton Rouge, La
Posts: 1,212
Re: Props To Ryan @ ESD!
Yes sir that is what Ryan does best. He makes his **** right the first and it ships it out ASAP. I was surprised when i got my stuff so quick here in Baton Rouge, La. Ever since then, i have never hesitated to send him my money. Because i know i'll get what i pay for. And what he makes is next to perfect.......Props as always to him. Now get that **** fixed and go crash it some. Its not pretty until u have some scratches on those bar ends, LMAO......jfwy...=-)
11-04-2009, 06:33 PM
#3
Registered User
Join Date: Nov 2006
Location: Grover Beach, CA
Posts: 532
Re: Props To Ryan @ ESD!
Thanks for the support!!! USPS is makin me look good, LOL. I heard they are shutting down alot of offices, but it seems like they still ship 2-3 days across the country. Thanks agian!
Ryan
Ryan
11-04-2009, 06:37 PM
#4
Registered User
Join Date: Jun 2007
Location: Baton Rouge, La
Posts: 1,212
Re: Props To Ryan @ ESD!
Ryan, any idea if those protaper barends would work on the BBR's. I still have my BBR setup that ive become married to, and i would hate to have to change bars just for end. get my drift, hehe...=-)
11-04-2009, 06:40 PM
#5
Registered User
Join Date: Nov 2006
Location: Grover Beach, CA
Posts: 532
Re: Props To Ryan @ ESD!
I have the bbr's covered now too, every bar is different size inside, but I am slowly getting them in here. BBR, Protaper, and 50stunt bars so far. I just need to update the site, along with 1000 other things, LOL. Let me see if I can add that option real quick on the site, give me 20-30 minutes
11-04-2009, 06:45 PM
#7
Registered User
Join Date: Nov 2006
Location: Grover Beach, CA
Posts: 532
Re: Props To Ryan @ ESD!
http://www.50stunt.com/product_p/bar%20ends.htm
11-04-2009, 08:11 PM
#10
Registered User
Join Date: Jun 2007
Location: Baton Rouge, La
Posts: 1,212
Re: Props To Ryan @ ESD!
BOOM, done, I love this new site, way easy to make changes
http://www.50stunt.com/product_p/bar%20ends.htm
http://www.50stunt.com/product_p/bar%20ends.htm
Once again, Thank You........Anytime...=-)
No bullshit talking here, hehe...=-)
11-04-2009, 08:24 PM
#11
Registered User
Join Date: Nov 2006
Location: Grover Beach, CA
Posts: 532
11-04-2009, 09:06 PM
#13
Registered User
Thread Starter
Join Date: Mar 2009
Location: Lake Charles, LA
Posts: 239
Re: Props To Ryan @ ESD!
Respect, you're close to me actually. Glad we get our stuff fast!!
Installed the cable tonight and the throttle works again like it's suppose to! I'm still stuck on why it's hard as hell to crank and if it does finally turn over it won't run for long and wont' rev... This has nothing to do with Ryan's stuff, it was already a previous problem from the ProTaper throttle tube which I cracked tightening it when installing and the cable not fitting the carb right. It also drips a little bit of gas from the bottom of the carb through the tube..
Anyone have any ideas?? This thing was so easy to start before I put the bars on...
Installed the cable tonight and the throttle works again like it's suppose to!
I'm still stuck on why it's hard as hell to crank and if it does finally turn over it won't run for long and wont' rev... This has nothing to do with Ryan's stuff, it was already a previous problem from the ProTaper throttle tube which I cracked tightening it when installing and the cable not fitting the carb right. It also drips a little bit of gas from the bottom of the carb through the tube.. Anyone have any ideas?? This thing was so easy to start before I put the bars on...
11-04-2009, 10:40 PM
#14
Registered User
Join Date: Jun 2007
Location: Baton Rouge, La
Posts: 1,212
Re: Props To Ryan @ ESD!
Respect, you're close to me actually. Glad we get our stuff fast!!
Installed the cable tonight and the throttle works again like it's suppose to! I'm still stuck on why it's hard as hell to crank and if it does finally turn over it won't run for long and wont' rev... This has nothing to do with Ryan's stuff, it was already a previous problem from the ProTaper throttle tube which I cracked tightening it when installing and the cable not fitting the carb right. It also drips a little bit of gas from the bottom of the carb through the tube..
Anyone have any ideas?? This thing was so easy to start before I put the bars on...
Installed the cable tonight and the throttle works again like it's suppose to!
I'm still stuck on why it's hard as hell to crank and if it does finally turn over it won't run for long and wont' rev... This has nothing to do with Ryan's stuff, it was already a previous problem from the ProTaper throttle tube which I cracked tightening it when installing and the cable not fitting the carb right. It also drips a little bit of gas from the bottom of the carb through the tube.. Anyone have any ideas?? This thing was so easy to start before I put the bars on...
11-05-2009, 08:20 AM
#15
Registered User
Thread Starter
Join Date: Mar 2009
Location: Lake Charles, LA
Posts: 239
Re: Props To Ryan @ ESD!
Definitely man, that's a good middle place to meet too. You know some places over there to ride?
Went to dr. yesterday for 3 month post-op and only 50% fused. Can't tell you how bad it sucks having this 50 and can't ride the damn thing. and I gotta look at it and the busa in my living room 24/7! LOL
Went to dr. yesterday for 3 month post-op and only 50% fused. Can't tell you how bad it sucks having this 50 and can't ride the damn thing. and I gotta look at it and the busa in my living room 24/7! LOL
11-08-2009, 11:59 AM
#16
Registered User
Join Date: Jun 2007
Location: Baton Rouge, La
Posts: 1,212
Re: Props To Ryan @ ESD!
Definitely man, that's a good middle place to meet too. You know some places over there to ride?
Went to dr. yesterday for 3 month post-op and only 50% fused. Can't tell you how bad it sucks having this 50 and can't ride the damn thing. and I gotta look at it and the busa in my living room 24/7! LOL
Went to dr. yesterday for 3 month post-op and only 50% fused. Can't tell you how bad it sucks having this 50 and can't ride the damn thing. and I gotta look at it and the busa in my living room 24/7! LOL
11-08-2009, 05:29 PM
#17
Registered User
Thread Starter
Join Date: Mar 2009
Location: Lake Charles, LA
Posts: 239
Re: Props To Ryan @ ESD!
Definitely no rushing, just sucks waiting. LOL The kart place sounds ideal, I'll have street tires before too long so I'd be game on taking it around there too! Can't wait
Thread
Thread Starter
Forum
Replies
Last Post
