hey all, as i havent posted in this part before this is my bike
well i am looking for some pegs, as i am busy over the next few days i thought i most post before i get around to it...
would regular bmx pegs be ok?? yess no reson and links
thanks guys:YEAH

http://bikepics.com/pictures/795233/

http://bikepics.com/pictures/794298/

 

I see no reason why a set of BMX pegs wouldnt work, you'll have to bore out the bolt holes though to 1/2" to make em work, but thats not a problem to do I wouldnt think.

just make sure you have enough metal left to support your weight when you bolt em up and I'd figure there is no problem. I'm doing this to my XR80 today .

 

i just put bmx pegs on my 50 like 2 days ago, i didnt have to bore them or anything, just get them off a bike that has three quarter bolts, they should fit

 

on mine, I ultimately wound up fabbing something up from some stuff I had around, the axle was too short for the BMX pegs, so until I get a longer axle, I cant use em. thats $10 down the drain.

 

you can put one side on, like the left for stagards. in my experience, once you install pegs, the rear spokes will fail(if they are stock, not hd) losenng then breaking.

 

I still need to upgrade my spokes then. a few of mine already broke from various crashes in dirt.

 

ya bmx pegs. I'd normally say 50stunt but they wouldn't work with that rear swingarm.