Rear hand brake set-up's? Got pictures?
 

Well guys I have a 636 and really need some expertise on the best set-up to use for great clearance and manageability. I am currently using another 636 brake master cylinder to operate my rear brake but it seems to be too damn far down but I really cant see how to raise it without making me raise the clutch lever. I have talk to a few guys at STUNTWARS rocking f4I's and they are using cbr 900 brake master cylinders but my dumb ass didn’t take any pict's so if any of you guys have hand brake combo's that are working great for you please hook a brother up and take a few minutes to post up them pictures. :shruggs

Re: Rear hand brake set-up's? Got pictures?
 

Yeah I"m looking for one aswell

Re: Rear hand brake set-up's? Got pictures?
 

I'm using 636 master cylinder and gsxr 1000 03 caliper.works great

Re: Rear hand brake set-up's? Got pictures?
 

Have any of you guys got some rear hand brake pictures to show positioning because I know its not that hard to figure out but maybe my bars are trimmed too much? :banghead

Re: Rear hand brake set-up's? Got pictures?
 

this is a 01 gix 1000

Re: Rear hand brake set-up's? Got pictures?
 

[QUOTE=GSXRFUN]Have any of you guys got some rear hand brake pictures to show positioning because I know its not that hard to figure out but maybe my bars are trimmed too much? :banghead[/QUOTE]

its not a 636 but it my r1 set up

Re: Rear hand brake set-up's? Got pictures?
 

you guys should take the headlight/turnsignal switches off....looks much cleaner and you can use a full grip

Re: Rear hand brake set-up's? Got pictures?
 

[QUOTE=DeltonaStunna]you guys should take the headlight/turnsignal switches off....looks much cleaner and you can use a full grip[/QUOTE]

i am using a full grip, plus my bike is a daily driver.

Re: Rear hand brake set-up's? Got pictures?
 

Thanks guys for the pictures, I am currently using a Frankenstein handlebar set up SV650 handlebars cut in the middle and widened to fit on my Fulllthrottleinc top tree but if I go to a Renthal type bar I should have the clearance to get my hand brake and clutch lever a little closer. Thanks again for the pictures :YEAH

Re: Rear hand brake set-up's? Got pictures?
 

[QUOTE=Artiom]I'm using 636 master cylinder and gsxr 1000 03 caliper.works great[/QUOTE]


how did you mount the caliper ???

Re: Rear hand brake set-up's? Got pictures?
 

any pics of f4i with hand breaks if so post em up

also where can you buy them from????

i thought u didnt need to hook up another caliper i thought u can run it off the same one just run a new line through the master cylinder,

Re: Rear hand brake set-up's? Got pictures?
 

can anybody let me know how to mount the rear calliper for a hand brake. I have a 900rr

Re: Rear hand brake set-up's? Got pictures?
 

Does anyone have a handbrake they are lookin to sell????

Re: Rear hand brake set-up's? Got pictures?
 

nice work on the digging :LOL

Re: Rear hand brake set-up's? Got pictures?
 

anyone know where to get one from?

Re: Rear hand brake set-up's? Got pictures?
 

yeah you can get them anywhere..go to your local bike shop and get a front break master and just flip it upside down and re mount the fluid resivior,,or you can buy a set up from GP TECH or FULL THROTTLE,then you gotta get a way to splice it into the rear master cylinder,gp tech sells junction valves that are made exactly for that

Re: Rear hand brake set-up's? Got pictures?
 

junction valves suck though just be warned... i tried to get the one i have to work and it just kept blowing break fluid out the oring seal in the valve... and then i would have to bleed the system again only to have it do it to me again... moral of story dual caliper more expensive but well worth the lack of headache and you dont ruin your eyes with break fluid

i had the teardrop shaped valve and apparently the master i had was just to strong so im saving up for a dual caliper

Re: Rear hand brake set-up's? Got pictures?
 

how did you mount the caliper brackets? did u cut one of them and weld them together? please give me a detailed description of u could!

Re: Rear hand brake set-up's? Got pictures?
 

So any one have a detailed description of how to mount the dual calipers on a 04 zx10r?

Re: Rear hand brake set-up's? Got pictures?
 

[QUOTE=808stunna;1415960]its not a 636 but it my r1 set up[/QUOTE]

This thread is probably long dead but what brand caliper backet is that. It's exactly what I want for my 636