636 help
 

i was out riding yesterday and bike died...guage cluster wont work and fuel pump wont prime. Checked fuses and all connections they looked good does anyone have any ideas what the problem is :shruggs

Re: 636 help
 

You check your ignition like i said?

Re: 636 help
 

i tapped on it but that didnt work...i havent took it apart or anything yet

Re: 636 help
 

i'm almost 100% sure this is it. what you described was exactly how my ignition was. how do you have it mounted? mine went bad from moisture settling in the bottom cap from being upside down

Re: 636 help
 

its mounted upright so no water should have gotten into it but i will take that cap off and check..i have to go to work i will check when i get off and let you no

Re: 636 help
 

did you check the experation date on that 636???:shruggs

Re: 636 help
 

Did you check the main fuse? It's on the left side of the bike I believe.

Re: 636 help
 

[quote=beardo;4333669]did you check the experation date on that 636???:shruggs[/quote]
yea its been expired for awhile

[quote=GSWITCH33;4333779]Did you check the main fuse? It's on the left side of the bike I believe.[/quote]
already checked its good

Re: 636 help
 

check batt voltage... im guessing alternater went out and battery is now dead.

Re: 636 help
 

[quote=04_street_636;4333941]check batt voltage... im guessing alternater went out and battery is now dead.[/quote]
i dont think so i tried to put a charger on it and it did the same shit....fuck this thing 2500 someone can come get it pm me

[ATTACH]253865[/ATTACH]

Re: 636 help
 

damn son 2500 huh???? your a fool figure it out and ride the 636 dude its a legit bike.

Re: 636 help
 

ive been all over this thing like a monkey fucking a football and i cant figure shit out...somebody that knows what there doing can get a good deal but im obviously a stupid fuck:shruggs

Re: 636 help
 

you a pissed off mother fucker that wants to go ride his POS 636 lol i know im in the same boat shit....

i have a 06 636 for 4800

[ATTACH]253860[/ATTACH]
[ATTACH]253861[/ATTACH]
[ATTACH]253862[/ATTACH]
[ATTACH]253863[/ATTACH]
[ATTACH]253864[/ATTACH]

Re: 636 help
 

clean title and freshly braced frame with 1/2'' gussets lol since this turned into a 636 sell fest.

Re: 636 help
 

[quote=slidewayz89;4333976]clean title and freshly braced frame with 1/2'' gussets lol since this turned into a 636 sell fest.[/quote]
you just wanted to post that cuz your shit looks so much better....fuck off :LOL

i will send someone 10$ if they can tell me whats fucked up with mine

Re: 636 help
 

lol i dont know about that but i have to say he will do it he is good for the loot tell the man whats wrong with the 636....but mines still for sale lol i want an 09

Re: 636 help
 

i had the same problem with my 04! its your ignition switch! one of the wires either came loose or broke the solder right off! take apart your ignition and see if one of the wires came loose! mine kept doin the same thing after a hard fall so i finally wired the ignition to a toggle switch and it fixed the problem!!! but im pretty sure its your ignition man!!

Re: 636 help
 

[quote=aut117;4333889]yea its been expired for awhile
well thats the prob... pull the wheels off it, and install another 636 on top of them....hahaha

already checked its good[/quote]

Re: 636 help
 

[QUOTE=BIGDIDDY;4333995]i had the same problem with my 04! its your ignition switch! one of the wires either came loose or broke the solder right off! take apart your ignition and see if one of the wires came loose! mine kept doin the same thing after a hard fall so i finally wired the ignition to a toggle switch and it fixed the problem!!! but im pretty sure its your ignition man!![/QUOTE]

Exactly...


So ugh man have you plugged in a new ignition to see if it works? anything? I'd almost bet you that $10 that is ur problem.

Re: 636 help
 

dont have another ignition to plug in or i would...i have taken apart the ignition and all wires were still good. If i could run it to a toggle i would do that