Hollywood Stunt Parts!
 

Hollywood Stunt Parts is now up and running! Located in Tampa Fl where some of the worlds best riders come from. At H.S.P. I'm the fabricator and bryan (mini guinea) works along side me in the R&D of our products. As a new stunt company we are starting out small and going to release our street fighter gauge stay and round bar for the F4i.

Street Fighter Gauge Stay; super light, yet strong and looks much better than zip ties. The stay holds your gauges off the left side of the bike near the tank, this keeps them out of your way and off of the ground unlike being fastened to the cage or other places. With an easy install and a low price of $65 shipped it's a great way to monitor your idle and fuel level while cleaning up the look of your stunt bike!

I have 25 made and ready to ship so you only wait for standard shipping time.

Both years of the 636 and even R6 are in the works now and will be avilable soon...

The F4i round bar is like most others offered but will not bend the cross bar, thus causing stress to the front tabs of the tail which over time will break. Made from 1 inch solid round bar and double mig welded with 1.5" x 1/4 flat for the frame. Same hole spacing as the SI round bar. $75 shipped!

Let me know what you all think!

Re: Hollywood Stunt Parts!
 

you plan on making parts for 05 636 i need a radaitor cage

Re: Hollywood Stunt Parts!
 

[quote=Drew C.;4328413]you plan on making parts for 05 636 i need a radaitor cage[/quote]

I sure do and that is one of my products soon to be released... Tryn to find a mint rad for a template cuz the one i have just wont cut it!

Re: Hollywood Stunt Parts!
 

[quote=I.Am.Hollywood!;4328417]I sure do and that is one of my products soon to be released... Tryn to find a mint rad for a template cuz the one i have just wont cut it![/quote]


sounds good let me now when u make them

Re: Hollywood Stunt Parts!
 

going to get started on it tomorrow if you want one soon... $65 shipped

Re: Hollywood Stunt Parts!
 

[quote=I.Am.Hollywood!;4328421]going to get started on it tomorrow if you want one soon... $65 shipped[/quote]

The price is right just need to see some pick of what it looks like and we got a deal

Re: Hollywood Stunt Parts!
 

[quote=Drew C.;4328423]The price is right just need to see some pick of what it looks like and we got a deal[/quote]


Word! Going to the local bike shop to pick up a mint rad tomorrow and i should be able to post up some pics ( bare no powdercoat) tomorrow night or at the latest sat afternoon! Should be able to get it coated and ready to ship monday... ill let you know fo sho

Re: Hollywood Stunt Parts!
 

[quote=I.Am.Hollywood!;4328406]Hollywood Stunt Parts is now up and running! Located in Tampa Fl where some of the worlds best riders come from. At H.S.P. I'm the fabricator and bryan (mini guinea) works along side me in the R&D of our products. As a new stunt company we are starting out small and going to release our street fighter gauge stay and round bar for the F4i.

Street Fighter Gauge Stay; super light, yet strong and looks much better than zip ties. The stay holds your gauges off the left side of the bike near the tank, this keeps them out of your way and off of the ground unlike being fastened to the cage or other places. With an easy install and a low price of $65 shipped it's a great way to monitor your idle and fuel level while cleaning up the look of your stunt bike!

I have 25 made and ready to ship so you only wait for standard shipping time.

Both years of the 636 and even R6 are in the works now and will be avilable soon...

The F4i round bar is like most others offered but will not bend the cross bar, thus causing stress to the front tabs of the tail which over time will break. Made from 1 inch solid round bar and double mig welded with 1.5" x 1/4 flat for the frame. Same hole spacing as the SI round bar. $75 shipped!

Let me know what you all think![/quote]


:yeah

Re: Hollywood Stunt Parts!
 

[QUOTE=secret weapon;4328500]:yeah[/QUOTE]


You think you could bring the 06 by the shop so I can make a jig for a Rad support some time?

Re: Hollywood Stunt Parts!
 

i was just thinking about something like this and wished there was one made for an r6...can't wait to see that one...is there no way to mount it in the front though?

Re: Hollywood Stunt Parts!
 

[quote=I.Am.Hollywood!;4328417]I sure do and that is one of my products soon to be released... Tryn to find a mint rad for a template cuz the one i have just wont cut it![/quote]
make sure you leave some slop in it for the guys that dont have mint rads. Or you will have a bunch of people flaming in the first week.

Re: Hollywood Stunt Parts!
 

[quote=ATOWN1101;4328695]make sure you leave some slop in it for the guys that dont have mint rads. Or you will have a bunch of people flaming in the first week.[/quote]

+2 I need a new radiator and a cage for my 05 636 or just a cage that will work without tabs being there cause I have none its just ziptied up :LOL

Re: Hollywood Stunt Parts!
 

[quote=*trix*;4328700]+2 I need a new radiator and a cage for my 05 636 or just a cage that will work without tabs being there cause I have none its just ziptied up :LOL[/quote]
that was the problem i had when i made them for the f4i i made them to fit a mint rad. unfortunately every one who bought one had some hagered busted ass shit:LOL and my rad cage did not fit :banghead now the new ones have slop and i just send some cushions to space the gaps.

Re: Hollywood Stunt Parts!
 

[quote=I.Am.Hollywood!;4328653]You think you could bring the 06 by the shop so I can make a jig for a Rad support some time?[/quote]

the 06 will be coming to H.S.P. next week as long as someone doesnt buy it from me in the mean time.

Re: Hollywood Stunt Parts!
 

A little more busy than I thought at the shop today with other things... will be getting to the Rad supports tomorrow! Thanx for the advice!

Re: Hollywood Stunt Parts!
 

Got the rad supports done for the F4i (almost) but still dont have a rad for the kawi's that will work for a template... ill keep you all posted!!

Re: Hollywood Stunt Parts!
 

u will have a 06 636 in the shop wednesday. the sale is pending but u can borrow it for a week to make your templates.:cheers

Re: Hollywood Stunt Parts!
 

Sounds like there's gonna be some gangsta shit comin out of this shop keep up the good work guys!

Re: Hollywood Stunt Parts!
 

[quote=secret weapon;4329875]u will have a 06 636 in the shop wednesday. the sale is pending but u can borrow it for a week to make your templates.:cheers[/quote]

[quote=Juniorf4i;4329886]Sounds like there's gonna be some gangsta shit comin out of this shop keep up the good work guys![/quote]

WORD!!! Thanx Dustin! and Jr. for the compliment!

Pics of the new F4i rad stay that i got back today! $65 bare shipped, $70 rattle can Shipped or, $90 powdercoated shipped!!! I know you all love options so i am offering the supports any way i can...

Re: Hollywood Stunt Parts!
 

[quote=I.Am.Hollywood!;4330389]WORD!!! Thanx Dustin! and Jr. for the compliment!

Pics of the new F4i rad stay that i got back today! $65 bare shipped, $70 rattle can Shipped or, $90 powdercoated shipped!!! I know you all love options so i am offering the supports any way i can...[/quote]


if the one for the 05 kawi looks like the f4i i take one raw for the 05 kawi 636 thanks good work :yeah and that good turn around time too keep it up