dual caliper bracket set up (pimp)
 

check out what my boy is makin. pimp s**t right here.
first one fits 03-04 636(my fit 04 and up)
second one fits 01-03 gsxr 6, 750 and 01 -02 gsxr 1k
thrid one fits 03 and up gsxr1k and 04 and up gsxr 6, 750

Re: dual caliper bracket set up (pimp)
 

how much ? who to contact ?

Re: dual caliper bracket set up (pimp)
 

looks cool! but why do you think this has never been done before by manufacturers? the idea is cool but is it practical? doesn't your disc become to hot in short time? it's just an idea...

Re: dual caliper bracket set up (pimp)
 

Just saw them on ebay.

Re: dual caliper bracket set up (pimp)
 

[QUOTE=Mikey P]looks cool! but why do you think this has never been done before by manufacturers? the idea is cool but is it practical? doesn't your disc become to hot in short time? it's just an idea...[/QUOTE]


...its a handbrake set-up.

Shit looks good.

Re: dual caliper bracket set up (pimp)
 

I want one but for a F4i :shruggs

Re: dual caliper bracket set up (pimp)
 

Nice brackets .... wheres the f4i setups.

Re: dual caliper bracket set up (pimp)
 

[QUOTE=Mikey P]looks cool! but why do you think this has never been done before by manufacturers? the idea is cool but is it practical? doesn't your disc become to hot in short time? it's just an idea...[/QUOTE]
WTF are you talking about?I didn't see anywhere that it said it has never been done before.And why would it get to hot in a short period of time?It's for a handbrake setup for stunting,not for extra stopping power.You don't use both at the same time ****head:banghead

Re: dual caliper bracket set up (pimp)
 

[QUOTE=Paul]WTF are you talking about?I didn't see anywhere that it said it has never been done before.And why would it get to hot in a short period of time?It's for a handbrake setup for stunting,not for extra stopping power.You don't use both at the same time ****head:banghead[/QUOTE]don't get mad just because he's dumb... he can't help it.

Re: dual caliper bracket set up (pimp)
 

[QUOTE=nickalltogether]don't get mad just because he's dumb... he can't help it.[/QUOTE]
+1..he is swedish after all haha joking.

Re: dual caliper bracket set up (pimp)
 

Sellin em???......How much?

Re: dual caliper bracket set up (pimp)
 

yea how much.. f4i?

Re: dual caliper bracket set up (pimp)
 

I need one for a 900RR. pm'ed you Zackie.....

Re: dual caliper bracket set up (pimp)
 

Ok I understand.. I have never seen it before on bikes so that's why I said manufacturers have never done this before. In stunt movies I haven't seen it too before.

[quote=TimsKFX400]+1..he is swedish after all haha joking.[/quote]

-2... so you're the funny man in here? :YEAH and I'm not swedish

Re: dual caliper bracket set up (pimp)
 

heres is mine, took one hour to make:YEAH

Re: dual caliper bracket set up (pimp)
 

Cool product. I suppose you could drill it for ANY calipers to fit, maybe even a front caliper

Re: dual caliper bracket set up (pimp)
 

[QUOTE=MikeM]Cool product. I suppose you could drill it for ANY calipers to fit, maybe even a front caliper[/QUOTE]


how is it ur so stoned yet so smart

Re: dual caliper bracket set up (pimp)
 

great idea, 905 had a killer design one too, personally i like everything about dual caliper other than the fact that its a ***** to change the tire.

making one for a front caliper would be savage, if he gets it legitamately i bet i could sell quite a few for him up here, holla atcha boy

Re: dual caliper bracket set up (pimp)
 

Dual Caliper is better ?? or maybe fulltrottle design is better ??


sorry with my english

Re: dual caliper bracket set up (pimp)
 

Phillykneck runs a front caliper on his bike for his HB setup. Prolly not a bad idea.

Re: dual caliper bracket set up (pimp)
 

the thing about f4i's or any honda and yamaha is that the caliper slides a rod unlike the gsxr and 636(636 slides on a rod too but is bolted to a different bracket first) He can make them for an f4i but i think the cost might go up a little because he will he to do somemore welding and cutting. i'll ask him tonight and let everyone know. I know f4i's are really big in stuntin so i'll make sure he gets er done.:YEAH

Re: dual caliper bracket set up (pimp)
 

todd ain't shit!

Re: dual caliper bracket set up (pimp)
 

[QUOTE=c r0ck 1]yea how much.. f4i?[/QUOTE]

Hell yeah! [SIZE="4"]Zackie Chan [/SIZE] Post up once you know something on the F4i's Oh yeah pictures pictures pictures have your friend take some of the F4i bracket completely installed on a F4i so we all know exactly what we are looking at and I am sure they will sell like crack rocks at a crackhead convention. :LOL

Re: dual caliper bracket set up (pimp)
 

We've been building those for about 2 years, just not massed produced. They work all right but a better option is welding and tapping a fitting on to the rear master and running a line to a handbrake.

2 calipers , 2 sets of lines ....... it works but there's better easier ways.

Re: dual caliper bracket set up (pimp)
 

[QUOTE=Squirrel_12]todd ain't shit![/QUOTE]
Whos Todd?:shruggs

Re: dual caliper bracket set up (pimp)
 

We here in Az perf dual calpier for a couple of reasons one you dont have to change pads as much and if one system brakes or fails you can use the other. personal preference and how much money you want to spend. keep up the good work. :YEAH [QUOTE=5thgear]We've been building those for about 2 years, just not massed produced. They work all right but a better option is welding and tapping a fitting on to the rear master and running a line to a handbrake.

2 calipers , 2 sets of lines ....... it works but there's better easier ways.[/QUOTE]

Re: dual caliper bracket set up (pimp)
 

[QUOTE=MikeM]Cool product. I suppose you could drill it for ANY calipers to fit, maybe even a front caliper[/QUOTE]
YOU SIR. ARE A GENIOUS. MIKEM IS MY HERO.

Im getting my plasma cutter right now and I'm gonna make this.. can you imagine how the feel on that thing?

i wonder if you can take a 3/8" block of steel and just torch the shit out and make it work

Re: dual caliper bracket set up (pimp)
 

I have always ran a dual caliper set up. I think it's the best.

Re: dual caliper bracket set up (pimp)
 

[QUOTE=Zackie Chan]We here in Az perf dual calpier for a couple of reasons . :YEAH[/QUOTE]


Speak for your self Zackie Chan:LOL

By Todd, mabey he means Tedd... HAHA

Re: dual caliper bracket set up (pimp)
 

[QUOTE=DEBO]Phillykneck runs a front caliper on his bike for his HB setup. Prolly not a bad idea.[/QUOTE]
that is what i want:YEAH

Re: dual caliper bracket set up (pimp)
 

Becareful on what calipers you use cause i tried gxsr calipers (because they are dual piston calipers) and they hit the inside of the wheel and wouldn't sit down on the rotor all the way. I think you can use 636 calipers on everything but gsxr but if everyone uses 636 calipers kawi capiler stocks are going to go threw the roof. :LOL

Re: dual caliper bracket set up (pimp)
 

I had to see for myself and you know what it looks like a match made in heaven. Clearance looks good on the back side also it should be easier to fabricate the bracket 2 pistons might be better than one and last brake pads are longer on front caliper providing a little more contact area. :2cents :shruggs

Front right caliper works off F4i, 954 or 929

Re: dual caliper bracket set up (pimp)
 

Hey [SIZE="5"]Zackie Chan[/SIZE] maybe you can pass my picts on to your friend who makes the dual caliper brackets maybe he can hook it up much easier? :2cents

Re: dual caliper bracket set up (pimp)
 

man, that sounds like that would be the sh!t to ride with that.. the gripping with a dual caliper on the front woulld add more power, so can anyone here say ENDO!!!!!!:YEAH

Re: dual caliper bracket set up (pimp)
 

[SIZE="4"]The picts and info is based off my findings for a F4i[/SIZE] [SIZE="5"]Can it be done?[/SIZE] This set-up is for a dual rear brake caliper :)

Re: dual caliper bracket set up (pimp)
 

:shruggs

Re: dual caliper bracket set up (pimp)
 

[QUOTE=SelloutMxer]how much ? who to contact ?[/QUOTE]




ted @ 602-295-9732

Re: dual caliper bracket set up (pimp)
 

[quote=Paul]WTF are you talking about?I didn't see anywhere that it said it has never been done before.And why would it get to hot in a short period of time?It's for a handbrake setup for stunting,not for extra stopping power.You don't use both at the same time ****head:banghead[/quote]


RACING 905 HAS BEEN SELLING THEM FOR AWILE BUT NOT DUEL

Re: dual caliper bracket set up (pimp)
 

[QUOTE=martino]YOU SIR. ARE A GENIOUS. MIKEM IS MY HERO.

Im getting my plasma cutter right now and I'm gonna make this.. can you imagine how the feel on that thing?

i wonder if you can take a 3/8" block of steel and just torch the shit out and make it work[/QUOTE]
Make me one too

Re: dual caliper bracket set up (pimp)
 

I need to make one for my crf450! My HB still sucks :banghead