03 04 636 parts
#1
03 04 636 parts
All prices include shipping in US.
-radiator with fan in very good shape, Not bent, no broken mounting tabs, no leaks, no repairs. $239
-Minty headlight, NO cracks, broken tabs or any repairs. This is as minty as they come for a used part. The only downside to headlight is the lenses do have nicks in them from everyday road debris, missing 1 headlight bulb. $239
-headlight housing, the 2 top mount tabs have been fiberglassed, Someone hacked up the harness, I do not have the 2 cups for the back of headlight, and the lenses are dirty on inside of headlight. $139
-I have a minty ram air (no damage) $99
-ignition, gas cap and trunk lock. There is rash on top of ignition and some on gas cap. The key slides into ignition with no problem and turns butter smooth. $99
-Straight rear rim $79
-straight front rim powdercoated sun gold, needs to be repainted, the gold does not look to good. $179
-Minty rear seat, one very very small nick on edge. $99
-Used 56 tooth thrust company sprocket $55
-rear rotor, no groves or warping $25
-wire harness for the coils only $15
-Rectifier $49
-fuse box $25
-Scotts stabilizer mounting kit $100
-both mirrors, have some scrathes and one of the bottom mounts is broken. $25
-Left handlebar switch assembly (some light sctarhes on top) $20
-swingarm $39
-rear shock $39
-Lower triple tree with bearings $55
-Upper triple tree $49
-front calipers with good pads $45
-lowering links $24
-black front fender no cracks or repairs $35
-Silver front fender has crack that was repaired and missing a small junk (damaged is on side of fender, it can still be mounted with no problems) $19
-cushdrive with the rubbers (one of the studs needs to have threads chased) $25
-Front brake reservoir $18
-battery tray and undertray(has a piece cut of the side) $20
-swingarm bolt $18
-radiator overflow bottle $13
-Cut down windscreen (stickers all over it) $13
-left side passenger rear set, not pretty $15
-The 4 subrame bolts and nuts $9
-stock air filter $12
-shifter side heel plate $9
-Rubber seal for ram air $9
-Rubber seal for ram air with screen $13
send me email address for pictures. Dan
-radiator with fan in very good shape, Not bent, no broken mounting tabs, no leaks, no repairs. $239
-Minty headlight, NO cracks, broken tabs or any repairs. This is as minty as they come for a used part. The only downside to headlight is the lenses do have nicks in them from everyday road debris, missing 1 headlight bulb. $239
-headlight housing, the 2 top mount tabs have been fiberglassed, Someone hacked up the harness, I do not have the 2 cups for the back of headlight, and the lenses are dirty on inside of headlight. $139
-I have a minty ram air (no damage) $99
-ignition, gas cap and trunk lock. There is rash on top of ignition and some on gas cap. The key slides into ignition with no problem and turns butter smooth. $99
-Straight rear rim $79
-straight front rim powdercoated sun gold, needs to be repainted, the gold does not look to good. $179
-Minty rear seat, one very very small nick on edge. $99
-Used 56 tooth thrust company sprocket $55
-rear rotor, no groves or warping $25
-wire harness for the coils only $15
-Rectifier $49
-fuse box $25
-Scotts stabilizer mounting kit $100
-both mirrors, have some scrathes and one of the bottom mounts is broken. $25
-Left handlebar switch assembly (some light sctarhes on top) $20
-swingarm $39
-rear shock $39
-Lower triple tree with bearings $55
-Upper triple tree $49
-front calipers with good pads $45
-lowering links $24
-black front fender no cracks or repairs $35
-Silver front fender has crack that was repaired and missing a small junk (damaged is on side of fender, it can still be mounted with no problems) $19
-cushdrive with the rubbers (one of the studs needs to have threads chased) $25
-Front brake reservoir $18
-battery tray and undertray(has a piece cut of the side) $20
-swingarm bolt $18
-radiator overflow bottle $13
-Cut down windscreen (stickers all over it) $13
-left side passenger rear set, not pretty $15
-The 4 subrame bolts and nuts $9
-stock air filter $12
-shifter side heel plate $9
-Rubber seal for ram air $9
-Rubber seal for ram air with screen $13
send me email address for pictures. Dan
Last edited by Dan_DGAF666; 09-22-2011 at 01:41 PM.
#4
#9
Re: 03 04 636 parts
PARTS UPDATE
All prices include shipping in US.
-radiator with fan in very good shape, Not bent, no broken mounting tabs, no leaks, no repairs. $239
-Minty headlight SOLD
-headlight housing, the 2 top mount tabs have been fiberglassed, Someone hacked up the harness, I do not have the 2 cups for the back of headlight, and the lenses are dirty on inside of headlight. $125
-High mount micron exhaust, Can has small ding on top, Some rash on tip, also a little rash on midpipe. The can body is 11 1/2 long. overall length of can is 16 inches. $89
-I have a minty ram air (no damage) $99
-ignition, gas cap and trunk lock.SOLD
-Straight rear rim $79
-straight front rim SOLD
-Minty passenger seat, no rips nicks or tears $99
-NEW 60t 520 pitch thrust company sprocket $75
-Used 56 tooth 520 pitch thrust company sprocket $50
-rear rotor, no groves or warping $25
-wire harness for the coils only $14
-Rectifier $45
-fuse box $25
-Scotts stabilizer mounting kit $95
-both mirrors, have some scrathes and one of the bottom mounts is broken. $25
-Left handlebar switch assembly (some light sctarhes on top) $20
-swingarm $39
-rear shock $39
-Lower triple tree with bearings $55
-Upper triple tree SOLD
-front calipers NO PADS $39
-rear caliper NO PADS $24
-lowering links SOLD
-black front fender no cracks or repairs $35
-Silver front fender has crack that was repaired and missing a small junk (damaged is on side of fender, it can still be mounted with no problems) $19
-cushdrive with the rubbers (one of the studs needs to have threads chased) $25
-Front brake reservoir $18
-battery tray and undertray(has a piece cut of the side) $20
-swingarm bolt $18
-radiator overflow bottle $13
-Cut down windscreen (stickers all over it) $13
-left side passenger rear set, not pretty $15
-The 4 subrame bolts and nuts $9
-stock air filter $12
-shifter side heel plate $9
-Rubber seal for ram air $9
-Rubber seal for ram air with screen $13
send me email address for pictures. Dan
All prices include shipping in US.
-radiator with fan in very good shape, Not bent, no broken mounting tabs, no leaks, no repairs. $239
-Minty headlight SOLD
-headlight housing, the 2 top mount tabs have been fiberglassed, Someone hacked up the harness, I do not have the 2 cups for the back of headlight, and the lenses are dirty on inside of headlight. $125
-High mount micron exhaust, Can has small ding on top, Some rash on tip, also a little rash on midpipe. The can body is 11 1/2 long. overall length of can is 16 inches. $89
-I have a minty ram air (no damage) $99
-ignition, gas cap and trunk lock.SOLD
-Straight rear rim $79
-straight front rim SOLD
-Minty passenger seat, no rips nicks or tears $99
-NEW 60t 520 pitch thrust company sprocket $75
-Used 56 tooth 520 pitch thrust company sprocket $50
-rear rotor, no groves or warping $25
-wire harness for the coils only $14
-Rectifier $45
-fuse box $25
-Scotts stabilizer mounting kit $95
-both mirrors, have some scrathes and one of the bottom mounts is broken. $25
-Left handlebar switch assembly (some light sctarhes on top) $20
-swingarm $39
-rear shock $39
-Lower triple tree with bearings $55
-Upper triple tree SOLD
-front calipers NO PADS $39
-rear caliper NO PADS $24
-lowering links SOLD
-black front fender no cracks or repairs $35
-Silver front fender has crack that was repaired and missing a small junk (damaged is on side of fender, it can still be mounted with no problems) $19
-cushdrive with the rubbers (one of the studs needs to have threads chased) $25
-Front brake reservoir $18
-battery tray and undertray(has a piece cut of the side) $20
-swingarm bolt $18
-radiator overflow bottle $13
-Cut down windscreen (stickers all over it) $13
-left side passenger rear set, not pretty $15
-The 4 subrame bolts and nuts $9
-stock air filter $12
-shifter side heel plate $9
-Rubber seal for ram air $9
-Rubber seal for ram air with screen $13
send me email address for pictures. Dan
#12
Re: 03 04 636 parts
PARTS UPDATE
All prices include shipping in US.
-radiator with fan in very good shape, Not bent, no broken mounting tabs, no leaks, no repairs. $229
-Minty headlight SOLD
-headlight housing, the 2 top mount tabs have been fiberglassed, Someone hacked up the harness, I do not have the 2 cups for the back of headlight, and the lenses are dirty on inside of headlight. $125
-High mount micron exhaust, Can has small ding on top, Some rash on tip, also a little rash on midpipe. The can body is 11 1/2 long. overall length of can is 16 inches. $85
-ignition, gas cap and trunk lock.SOLD
-straight front rim SOLD
-Straight rear rim $75
-passenger seat, 1 small nick $85
-NEW 60t 520 pitch thrust company sprocket $75
-Used 56 tooth 520 pitch thrust company sprocket $50
-rear rotor, no groves or warping $25
-wire harness for the coils only $14
-Rectifier $45
-fuse box $25
-Scotts stabilizer mounting kit $95
-both mirrors, have some scrathes and one of the bottom mounts is broken. $25
-Left handlebar switch assembly (some light sctarhes on top) $20
-swingarm $39
-rear shock SOLD
-Lower triple tree with bearings $55
-Upper triple tree SOLD
-front calipers NO PADS $39
-rear caliper NO PADS $24
-lowering links SOLD
-black front fender no cracks or repairs $35
-Silver front fender has crack that was repaired and missing a small junk (damaged is on side of fender, it can still be mounted with no problems) $19
-cushdrive with the rubbers (one of the studs needs to have threads chased) $25
-Front brake reservoir $18
-battery tray and undertray(has a piece cut of the side) $20
-swingarm bolt $18
-radiator overflow bottle $13
-Cut down windscreen (stickers all over it) $13
-left side passenger rear set, not pretty $15
-The 4 subrame bolts and nuts $9
-stock air filter $12
-shifter side heel plate $9
-Rubber seal for ram air $9
-Rubber seal for ram air with screen $13
send me email address for pictures. Dan
All prices include shipping in US.
-radiator with fan in very good shape, Not bent, no broken mounting tabs, no leaks, no repairs. $229
-Minty headlight SOLD
-headlight housing, the 2 top mount tabs have been fiberglassed, Someone hacked up the harness, I do not have the 2 cups for the back of headlight, and the lenses are dirty on inside of headlight. $125
-High mount micron exhaust, Can has small ding on top, Some rash on tip, also a little rash on midpipe. The can body is 11 1/2 long. overall length of can is 16 inches. $85
-ignition, gas cap and trunk lock.SOLD
-straight front rim SOLD
-Straight rear rim $75
-passenger seat, 1 small nick $85
-NEW 60t 520 pitch thrust company sprocket $75
-Used 56 tooth 520 pitch thrust company sprocket $50
-rear rotor, no groves or warping $25
-wire harness for the coils only $14
-Rectifier $45
-fuse box $25
-Scotts stabilizer mounting kit $95
-both mirrors, have some scrathes and one of the bottom mounts is broken. $25
-Left handlebar switch assembly (some light sctarhes on top) $20
-swingarm $39
-rear shock SOLD
-Lower triple tree with bearings $55
-Upper triple tree SOLD
-front calipers NO PADS $39
-rear caliper NO PADS $24
-lowering links SOLD
-black front fender no cracks or repairs $35
-Silver front fender has crack that was repaired and missing a small junk (damaged is on side of fender, it can still be mounted with no problems) $19
-cushdrive with the rubbers (one of the studs needs to have threads chased) $25
-Front brake reservoir $18
-battery tray and undertray(has a piece cut of the side) $20
-swingarm bolt $18
-radiator overflow bottle $13
-Cut down windscreen (stickers all over it) $13
-left side passenger rear set, not pretty $15
-The 4 subrame bolts and nuts $9
-stock air filter $12
-shifter side heel plate $9
-Rubber seal for ram air $9
-Rubber seal for ram air with screen $13
send me email address for pictures. Dan
#14
Re: 03 04 636 parts
PARTS UPDATE
All prices include shipping in US.
-radiator with fan in very good shape, Not bent, no broken mounting tabs, no leaks, no repairs. $239
-Minty headlight SOLD
-headlight housing, the 2 top mount tabs have been fiberglassed, Someone hacked up the harness, I do not have the 2 cups for the back of headlight, and the lenses are dirty on inside of headlight. $125
-High mount micron exhaust, Can has small ding on top, Some rash on tip, also a little rash on midpipe. The can body is 11 1/2 long. overall length of can is 16 inches. $80
-I have a minty ram air SOLD
-ignition, gas cap and trunk lock SOLD
-Straight rear rim $79
-straight front rim SOLD
-passenger 1 small nick on edge $79
-NEW 60t 520 pitch thrust company sprocket $75
-Used 56 tooth 520 pitch thrust company sprocket $45
-rear rotor, no groves or warping $25
-wire harness for the coils only $14
-Rectifier $35
-fuse box $20
-Scotts stabilizer mounting kit $95
-both mirrors, have some scrathes and one of the bottom mounts is broken. $25
-Left handlebar switch assembly (some light sctarhes on top) $19
-swingarm SOLD
-rear shock SOLD
-Lower triple tree with bearings $55
-Upper triple tree SOLD
-front calipers NO PADS SOLD
-rear caliper NO PADS $24
-lowering links SOLD
-black front fender no cracks or repairs $35
-Silver front fender has crack that was repaired and missing a small junk (damaged is on side of fender, it can still be mounted with no problems) $19
-cushdrive SOLD
-Front brake reservoir $18
-battery tray and undertray(has a piece cut of the side) $20
-swingarm bolt $18
-radiator overflow bottle $13
-Cut down windscreen (stickers all over it) $13
-left side passenger rear set, not pretty $15
-The 4 subrame bolts and nuts $9
-stock air filter $12
-shifter side heel plate $9
-Rubber seal for ram air $9
-Rubber seal for ram air with screen $13
send me email address for pictures. Dan
All prices include shipping in US.
-radiator with fan in very good shape, Not bent, no broken mounting tabs, no leaks, no repairs. $239
-Minty headlight SOLD
-headlight housing, the 2 top mount tabs have been fiberglassed, Someone hacked up the harness, I do not have the 2 cups for the back of headlight, and the lenses are dirty on inside of headlight. $125
-High mount micron exhaust, Can has small ding on top, Some rash on tip, also a little rash on midpipe. The can body is 11 1/2 long. overall length of can is 16 inches. $80
-I have a minty ram air SOLD
-ignition, gas cap and trunk lock SOLD
-Straight rear rim $79
-straight front rim SOLD
-passenger 1 small nick on edge $79
-NEW 60t 520 pitch thrust company sprocket $75
-Used 56 tooth 520 pitch thrust company sprocket $45
-rear rotor, no groves or warping $25
-wire harness for the coils only $14
-Rectifier $35
-fuse box $20
-Scotts stabilizer mounting kit $95
-both mirrors, have some scrathes and one of the bottom mounts is broken. $25
-Left handlebar switch assembly (some light sctarhes on top) $19
-swingarm SOLD
-rear shock SOLD
-Lower triple tree with bearings $55
-Upper triple tree SOLD
-front calipers NO PADS SOLD
-rear caliper NO PADS $24
-lowering links SOLD
-black front fender no cracks or repairs $35
-Silver front fender has crack that was repaired and missing a small junk (damaged is on side of fender, it can still be mounted with no problems) $19
-cushdrive SOLD
-Front brake reservoir $18
-battery tray and undertray(has a piece cut of the side) $20
-swingarm bolt $18
-radiator overflow bottle $13
-Cut down windscreen (stickers all over it) $13
-left side passenger rear set, not pretty $15
-The 4 subrame bolts and nuts $9
-stock air filter $12
-shifter side heel plate $9
-Rubber seal for ram air $9
-Rubber seal for ram air with screen $13
send me email address for pictures. Dan
#19
Re: 03 04 636 parts
PARTS UPDATE
All prices include shipping in US.
-radiator with fan in very good shape, Not bent, no broken mounting tabs, no leaks, no repairs. $239
-High mount micron exhaust, Can has small ding on top, Some rash on tip, also a little rash on midpipe. The can body is 11 1/2 long. overall length of can is 16 inches. $69
-ram air stay no damage $80 shipped
-mirror stay bracket $50 shipped
-Straight rear rim $75
-Used 56 tooth 520 pitch thrust company sprocket $45
-rear rotor, no groves or warping $25
-wire harness for the coils only $14
-front axle and spacers $19
-Rectifier $35
-fuse box $20
-Left handlebar switch assembly (some light sctarhes on top) $19
-Lower triple tree with bearings $55
-rear caliper NO PADS $24
-black front fender no cracks or repairs $35
-Silver front fender has crack that was repaired and missing a small junk (damaged is on side of fender, it can still be mounted with no problems) $19
-Front brake reservoir $18
-battery tray and undertray ( undertray has a piece cut off the side) $20
-swingarm bolt $18
-radiator overflow bottle $13
-Cut down windscreen (stickers all over it) $13
-The 4 subrame bolts and nuts $9
-stock air filter $12
-shifter side heel plate $9
-Rubber seal for ram air $9
-Rubber seal for ram air with screen $13
-Minty headlight SOLD
-headlight housing SOLD
-Scotts stabilizer mounting kit SOLD
-straight front rim SOLD
-passenger 1 small nick on edge SOLD
-NEW 60t 520 pitch thrust company sprocket SOLD
-I have a minty ram air SOLD
-ignition, gas cap and trunk lock SOLD
-both mirrors SOLD
-swingarm SOLD
-rear shock SOLD
-Upper triple tree SOLD
-front calipers NO PADS SOLD
-lowering links SOLD
-cushdrive SOLD
-left side passenger rear set SOLD
send me email address for pictures. Dan
All prices include shipping in US.
-radiator with fan in very good shape, Not bent, no broken mounting tabs, no leaks, no repairs. $239
-High mount micron exhaust, Can has small ding on top, Some rash on tip, also a little rash on midpipe. The can body is 11 1/2 long. overall length of can is 16 inches. $69
-ram air stay no damage $80 shipped
-mirror stay bracket $50 shipped
-Straight rear rim $75
-Used 56 tooth 520 pitch thrust company sprocket $45
-rear rotor, no groves or warping $25
-wire harness for the coils only $14
-front axle and spacers $19
-Rectifier $35
-fuse box $20
-Left handlebar switch assembly (some light sctarhes on top) $19
-Lower triple tree with bearings $55
-rear caliper NO PADS $24
-black front fender no cracks or repairs $35
-Silver front fender has crack that was repaired and missing a small junk (damaged is on side of fender, it can still be mounted with no problems) $19
-Front brake reservoir $18
-battery tray and undertray ( undertray has a piece cut off the side) $20
-swingarm bolt $18
-radiator overflow bottle $13
-Cut down windscreen (stickers all over it) $13
-The 4 subrame bolts and nuts $9
-stock air filter $12
-shifter side heel plate $9
-Rubber seal for ram air $9
-Rubber seal for ram air with screen $13
-Minty headlight SOLD
-headlight housing SOLD
-Scotts stabilizer mounting kit SOLD
-straight front rim SOLD
-passenger 1 small nick on edge SOLD
-NEW 60t 520 pitch thrust company sprocket SOLD
-I have a minty ram air SOLD
-ignition, gas cap and trunk lock SOLD
-both mirrors SOLD
-swingarm SOLD
-rear shock SOLD
-Upper triple tree SOLD
-front calipers NO PADS SOLD
-lowering links SOLD
-cushdrive SOLD
-left side passenger rear set SOLD
send me email address for pictures. Dan
Last edited by Dan_DGAF666; 01-01-2012 at 05:51 PM.