2006 636 Taylor, TX
Thread Starter
Registered User
Joined: Feb 2010
Posts: 163
From: Texas
2006 636 Taylor, TX
I have a 2006 636, with a clean title signed by previous owner, never put it in my name. It has lowers and a tail installed, has mids off of the bike, plastics are kind of beat up. Comes with A-Town cage and sub-brace/roundbar, OMR subcage, 56 tooth sprocket with brand new chain. Has a dented tank and servo eliminator. Also has an Arrow slipon and flipped clipons. I never stunted with the bike, but bought the cage and subcage used, but in very good condition. 07 rearsets installed and EZ-pull clutch.
Bad: Has a ding in the front wheel that keeps it from holding air, can be hammered out, just haven't had time. Also needs brakes bled. Bike also has one little fin cracked on the radiator that leaks, can easily be JB Weld-ed.
Has a little four cell battery that started the bike for a week straight, then I let it set for a few days and it was cold, then it wouldn't crank the bike. But just needs an initial jump and then it's good as long as it's started on a consistent basis.
Asking $3000 for the bike as is, or for $3600 will throw in a bunch of spare parts including:
-2 spare gas tanks, both have working pumps, one is jacked up, the other has 2 small dents.
-NDC Radiator cage, brand new.
-FI 0-degree clipons
-spare real wheel/tire minus a hub.
-07 SE frontend, faded forks, but good condition forks and wheel, minus calipers.
-CBR1k master
-A bunch of other little pieces.
For $3900 I'll include a full set of Attack race plastics 8.8/10 condition.
Shoot me a PM for more info, I can send some more pics from my phone later on, only have crappy ones on there right now.
Bike is about 30 minutes from Austin, TX.
Bad: Has a ding in the front wheel that keeps it from holding air, can be hammered out, just haven't had time. Also needs brakes bled. Bike also has one little fin cracked on the radiator that leaks, can easily be JB Weld-ed.
Has a little four cell battery that started the bike for a week straight, then I let it set for a few days and it was cold, then it wouldn't crank the bike. But just needs an initial jump and then it's good as long as it's started on a consistent basis.
Asking $3000 for the bike as is, or for $3600 will throw in a bunch of spare parts including:
-2 spare gas tanks, both have working pumps, one is jacked up, the other has 2 small dents.
-NDC Radiator cage, brand new.
-FI 0-degree clipons
-spare real wheel/tire minus a hub.
-07 SE frontend, faded forks, but good condition forks and wheel, minus calipers.
-CBR1k master
-A bunch of other little pieces.
For $3900 I'll include a full set of Attack race plastics 8.8/10 condition.
Shoot me a PM for more info, I can send some more pics from my phone later on, only have crappy ones on there right now.
Bike is about 30 minutes from Austin, TX.
Thread Starter
Registered User
Joined: Feb 2010
Posts: 163
From: Texas
Re: 2006 636 Taylor, TX
Bike no longer has OMR or Atown subframe brace on it. Also, stock exhaust was put back on, $2400.
I have a video I can email you of it starting up and running.
You can find individual stunt parts here: https://www.stuntlife.com/forums/464...636-stunt.html
I have a video I can email you of it starting up and running.
You can find individual stunt parts here: https://www.stuntlife.com/forums/464...636-stunt.html
