frayz

Ok. I have a clean title 05 636 lots of new **** plus all of my spares for this bike are for sale. Bike will come with a freshly rebuilt motor and tons of new parts I just put on this bike(complete build in January) rode the bike a total of 6 lot sessions this year. Bike is streetfighter right now(fender +tank+tail).
****BRING A TRAILER FOR ALL THIS ********
List is as follows:

INSTALLED ON THE BIKE:
06 zx10 front end (NEW off of minty street bike with new seals)
08 zx6 front wheel and rotors (NEW)
Pirella Supercorsa SC1 Front Tire
Stainless Steel braded lines for the front (NEW)
06 zx10 front calipers w/NEW OEM Pads
06 636 clip ons flipped and turned out
BREMBO RCS19 (NEW) – 19x18 & 19x20 adjustable for front brakes w/adj lever
06 636 CABLES – clutch & throttle (NEW)
MAGURA 13mm for handbrake (NEW)
80” Handbrake line stainless steel (NEW)
Ohlins stabilizer w/ yana shiki 50mm fork clamp
Kleen Air Mod
Fan wired on all the time
Impaktech Cage (NEW-ish bought this year)
NEW Throttle bodies
NEW Fuel Pump
NEW Subframe
NEW 520 Chain and front sprocket
MSR EZ Pull
Ignition relocated by shock
CUSTOM BILLET FOOT PLATE (NEW)
NEW 929 4piston caliper + NEW OEM PADS (3 sessions on)
RBF600 Fluid in all brakes
Footbrake stainless steel lines + NEW OEM PADS & CALIPER
ESD Fat pegs for passenger pegs (BLACK)
SICK INNOVATIONS REARSETS (NEW)
52T Rear sprocket
Vortex Gas Cap
HOHEY 4piston DUAL CALIPER BRACKET
WRAPPED HEADERS
Dented Tank w/Lip welded on



List of spares that it comes with:
2 x Frames (1 COD & 1 COD missing a mount)
Blown Spare Motor
2 x OEM Front & rear seats MINT
3 Left Mid plastics
3 Right Mid Plastics
2 Left Lowers
2 Right Lowers
2 Uppers (One is good w/little rash, one is zipped tied back together)
2 x Tail plastics
Wiring Harness
ECU
CDI Box
2 x Battery Trays
Zx10 Lower Triple w/stem & bearings
OEM Gas cap
Throttle Bodes w/ Cables
2 Rear Masters
3 subframe brackets
2 rear tank mount brackets
Exhaust servo
Gauges (no rpms/speed displayed)
Exhaust side plastic
Rear caliper + bracket
Starter
3 x headers
Stock exhaust + midpipe
Left clipon assembly (clutch lever + headlight switches)
Stock grips
Front calipers + Lines + Pads
06 636 Upper & Lower Triples with stem
06 636 Front Forks (no leaks)
Airbox
Shock
2 x Swingarms
Ignition
2 x nondented tanks (one with tank plastic)
Kickstand
Front Axle
Rear Axle w/spacers and blocks
Water Pump
4 x coil packs
Windscreen
Front rotors
Subframe (tweaked)
Zx10 Forks (DAMAGED – bottom where calipers mount is broke)
3 x 636 fuel pumps
Brembo 16x18 Master Cyl

frayz

basic idea of what the bike looks like. this was the first mild rebuild, but same plastics and style forks etc

gsxr02stunter

Does it have enough Plastics to make a good looking bike?

frayz

Read through the spares. 2 1/2 sets of plastics. u just need a ram air tube/fairing stay.

frayz

to the top

fatttony

want to sell a rear seat if so shoot me a price

frayz

This is not a pick and choose your part. This is a sell all my ******* ****. Jeesus christ what is wrong with you people. It doesn't say i'll take food stamps or i want to sell a front axle.

$6k obo for EVERYTHING. And no i'm not going to sell u the gas out of the tank. **** you have a nice day

frayz

to the top. going to get a ram air tube and hook this thing up ff

fatttony

fu(k you **** sucker you had **** for sale and i ask if you want to sell a seat go suck your moms tit you broke *** baby. selling your **** cause your out of food stamps huh?

fatttony

6k for all your broken parts and a beat to hell bike? what a dreamer! gusse thats why theres no post other then people that need parts from you junk yard

fatttony

abortion is what your dad should have done to your mom when she said was pregant. gusse alittle spunk ran out of your moms *** and in her ****** and you where born

frayz

haha. right cocksmoker. If you would have passed high school you could read that its not a god damn part out thread. I'm tired of you ignorant ***** coming in here trying to buy $5 worth of parts.
Oh hey look this guys selling his bike, maybe i should waste his time about a god damn rear seat.

Go **** yourself buddy. And the only thing broke is a motor mount on ONE of the three frames and the spare motor. All the other good parts come out to over $3000 if i just was to part it out, but THEN AGAIN DEALING WITH CUMDUMPSTERS like you is why i'd rather just get rid of it all.

And i'm broke? Son i'm just going to **** all my money away on a bike, **** just isnt logical right now.

You can take that bullshit a couple miles down the road to hersheys park and SHOVE IT UP YOUR ***!

Jbarber

ha haha I had this same thing happen to me selling my honda last year. I just started telling people every part cost $2000 and it came with a bike for free.

jdarling28

you had the right idea bro

MAPIO

Bump! you can pretty much put together a hole 2nd bike with all that ****! i think its a little high on price but im sure youll still get it!

frayz

haha yeah man i'm glad i'm not the only one.
thanks man. yeah its missing wheels, radiator, rearsets, and a right clipon and it could be a full bike and still have **** left over.

MikeM

i'll give you $13 for the left clipon

skillz954

Any chance you'd be willing to sell me the brake pads for $20 shipped?? They still got a lot of meat left on them?? If they're less than 50% I'll give you $15 shipped.....let me know

frayz

Dick Loogie Stunts

i got $4.37 for the left swingarm spool...LMK asap..paypal ready...bwhahahahahahahahahahhahahahahahahhahahahh ahahahahhahahaha