f4i timing

Thread Tools
 
Search this Thread
 
Old Aug 14, 2004 | 07:40 PM
  #1  
Thread Starter
Registered User
 
Joined: Feb 2004
Posts: 2
From: tennessee
joeruss42 is an unknown quantity at this point
f4i timing

Does any one know how to time a 01 f4i long story, put a new head on and having trouble with timing both gears have ex--and in-- marks think iam out of time
Old Aug 14, 2004 | 08:51 PM
  #2  
Amateurboy's Avatar
Registered User
 
Joined: Dec 2003
Posts: 187
From: M'boro,TN
Amateurboy is an unknown quantity at this point
Re: f4i timing

It's about time you registered!! . Someone should be able to help.
Old Aug 15, 2004 | 09:44 AM
  #3  
Registered User
 
Joined: Apr 2004
Posts: 885
From: St Louis
HurricaneF2 is an unknown quantity at this point
Re: f4i timing

you have to spin the engine to where the timing mark on the fly wheel is in the right place, then align the cam timing marks. get you manual and it will tell you where it needs to be. theres usually more than one mark on the flywheel.

other than that, you cant change ignition timing, just cam timing
Old Aug 15, 2004 | 10:43 AM
  #4  
Thread Starter
Registered User
 
Joined: Feb 2004
Posts: 2
From: tennessee
joeruss42 is an unknown quantity at this point
Re: f4i timing

the crank is in the right spot but i need to know where the cam marks go it will take a week to get a book for it and honestly want to ride before then
Old Aug 15, 2004 | 10:55 AM
  #5  
Registered User
 
Joined: Apr 2004
Posts: 885
From: St Louis
HurricaneF2 is an unknown quantity at this point
Re: f4i timing

i got an f2 so i dont know if theyd be the same, i can check if ya want. when i did mine though, the intake and exhaust marks on each cam have a line on them, they should be straight across when the chain is on them, like this

intake--- exhaust---



eye it up with the top of the cylinder head. but my advice to you is wait till tomorrow and call the dealer and theyll be able to tell you. if you get it wrong and try and start it, theres a chance you might end up having a valve smack a piston and then youll be in worse shape
Old Aug 15, 2004 | 11:30 AM
  #6  
The$alesman's Avatar
www.slow-motions.com
 
Joined: Aug 2004
Posts: 140
From: Hazard, KY
The$alesman is an unknown quantity at this point
Re: f4i timing

On that same note does anyone know a way around the f4i's bank angle sensor? I tried the drilling a whole with a screw and that didn't work, anyone else know a trick?

Thanks
Old Aug 15, 2004 | 12:24 PM
  #7  
The$alesman's Avatar
www.slow-motions.com
 
Joined: Aug 2004
Posts: 140
From: Hazard, KY
The$alesman is an unknown quantity at this point
Re: f4i timing

On that same note does anyone know a way around the f4i's bank angle sensor? I tried the drilling a whole with a screw and that didn't work, anyone else know a trick?

Thanks
Old Aug 15, 2004 | 01:09 PM
  #8  
Amateurboy's Avatar
Registered User
 
Joined: Dec 2003
Posts: 187
From: M'boro,TN
Amateurboy is an unknown quantity at this point
Re: f4i timing

Originally Posted by The$alesman
On that same note does anyone know a way around the f4i's bank angle sensor? I tried the drilling a whole with a screw and that didn't work, anyone else know a trick?

Thanks

Are you talking about the tipover sensor on the front of the bike. If so cut the wires and tie the green and the red striped wire together and that will bypass it.
Old Aug 16, 2004 | 03:39 PM
  #9  
The$alesman's Avatar
www.slow-motions.com
 
Joined: Aug 2004
Posts: 140
From: Hazard, KY
The$alesman is an unknown quantity at this point
Re: f4i timing

Originally Posted by Amateurboy
Are you talking about the tipover sensor on the front of the bike. If so cut the wires and tie the green and the red striped wire together and that will bypass it.

Awesome, it worked, but on another note.. . how come I get this message when I try and start a new topic?

"The$alesman, you do not have permission to access this page. This could be due to one of several reasons:

Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation."

I am logged in, and I also donated some money to stuntlife and still no contributor tag? How long does it take to get it?? And why can't i make post?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
zeus_r6
Stunt Discussion
23
Mar 29, 2013 11:11 AM
Jay Rodriguez
Bike Parts Wanted
2
Jan 27, 2013 03:13 PM
zeus_r6
Stunt Discussion
0
Dec 9, 2012 09:46 AM
cutsheal5
Stunt Discussion
5
Nov 17, 2012 11:39 PM




All times are GMT -4. The time now is 12:07 PM.