Where can I get a good Hand break?
Thread Starter
Registered User
Joined: Oct 2003
Posts: 59
From: FOLSOM, CA/Bellingham, WA
Where can I get a good Hand break?
I was just curious about any previously well designed and manufactured hand breaks, I was talkin to darius at the Sac stunt fest, and he had made his own with some cable that he welded to the foot lever. But he said that it wasn't very responsive, I was just wonderin if any body knew of somebody that already makes some that have the bugs worked out?
Re: Where can I get a good Hand break? 
...
Joined: Oct 2003
Posts: 4,730
From: ......
Re: Where can I get a good Hand break?
www.racing905.com is soon to have a hand break i believe check them out under products
www.ChicagoRiders.com
Joined: May 2003
Posts: 7,911
From: Chicago, IL
Re: Where can I get a good Hand break?
all right ur slow...this is who most everyone is using as its reliable
Bill at www.FullThrottleInc.net
Bill at www.FullThrottleInc.net
www.ChicagoRiders.com
Joined: May 2003
Posts: 7,911
From: Chicago, IL
Re: Where can I get a good Hand break?
here is how u make ur own if ur looking to save money...
https://www.stuntlife.com/forums/sho...937#post1189937
good luck swank
Rob
https://www.stuntlife.com/forums/sho...937#post1189937
good luck swank
Rob
www.ChicagoRiders.com
Joined: May 2003
Posts: 7,911
From: Chicago, IL
Re: Where can I get a good Hand break?
Originally Posted by MasterShake
oh real cute link
ur comments are not needed...i didnt know it was not the full link *******
anyhow...here it is...make ur own
https://www.stuntlife.com/forums/sho...37#post1189937
Gas'er!!
Joined: Oct 2002
Posts: 6,272
From: from the East to the West
Re: Where can I get a good Hand break?
there is no question as to what you should get, use the best: www.FullThrottleInc.net
Bill is extremely nice and helpful, and he supports a lot of stuntriders.
It is a completely new rear master cylinder...
no pumping, no fading, no welding.
took me about 1 hour to mount, bleed, and test.
stuff is pimp and really works great. you can transfer from the foot to the hand and back with no problems...
here's a SHORT list of fellow riders i know run this:
Darius, J Britton, Myself....
this IS what you want. forget the 2 caliper crap with lines going everywhere, and required welding. this is the real deal.
Bill is extremely nice and helpful, and he supports a lot of stuntriders.
It is a completely new rear master cylinder...
no pumping, no fading, no welding.
took me about 1 hour to mount, bleed, and test.
stuff is pimp and really works great. you can transfer from the foot to the hand and back with no problems...
here's a SHORT list of fellow riders i know run this:
Darius, J Britton, Myself....
this IS what you want. forget the 2 caliper crap with lines going everywhere, and required welding. this is the real deal.
I Enjoy Posting At StuntLife!
Joined: Sep 2003
Posts: 3,558
From: cali
Re: Where can I get a good Hand break?
Originally Posted by TEACH C6
there is no question as to what you should get, use the best: www.FullThrottleInc.net
Bill is extremely nice and helpful, and he supports a lot of stuntriders.
It is a completely new rear master cylinder...
no pumping, no fading, no welding.
took me about 1 hour to mount, bleed, and test.
stuff is pimp and really works great. you can transfer from the foot to the hand and back with no problems...
here's a SHORT list of fellow riders i know run this:
Darius, J Britton, Myself....
this IS what you want. forget the 2 caliper crap with lines going everywhere, and required welding. this is the real deal.
Bill is extremely nice and helpful, and he supports a lot of stuntriders.
It is a completely new rear master cylinder...
no pumping, no fading, no welding.
took me about 1 hour to mount, bleed, and test.
stuff is pimp and really works great. you can transfer from the foot to the hand and back with no problems...
here's a SHORT list of fellow riders i know run this:
Darius, J Britton, Myself....
this IS what you want. forget the 2 caliper crap with lines going everywhere, and required welding. this is the real deal.
thing is pimp, i can lock up the rear no problem. if its not working, you installed it wrong 
CEO of o2w
Joined: May 2003
Posts: 843
From: New York
Re: Where can I get a good Hand break?
Originally Posted by TEACH C6
there is no question as to what you should get, use the best: www.FullThrottleInc.net
Bill is extremely nice and helpful, and he supports a lot of stuntriders.
It is a completely new rear master cylinder...
no pumping, no fading, no welding.
took me about 1 hour to mount, bleed, and test.
stuff is pimp and really works great. you can transfer from the foot to the hand and back with no problems...
here's a SHORT list of fellow riders i know run this:
Darius, J Britton, Myself....
this IS what you want. forget the 2 caliper crap with lines going everywhere, and required welding. this is the real deal.
Bill is extremely nice and helpful, and he supports a lot of stuntriders.
It is a completely new rear master cylinder...
no pumping, no fading, no welding.
took me about 1 hour to mount, bleed, and test.
stuff is pimp and really works great. you can transfer from the foot to the hand and back with no problems...
here's a SHORT list of fellow riders i know run this:
Darius, J Britton, Myself....
this IS what you want. forget the 2 caliper crap with lines going everywhere, and required welding. this is the real deal.
he even got that sh*t to work on my f2
Thread
Thread Starter
Forum
Replies
Last Post
samizx7
Bike Parts for Sale
6
Aug 28, 2013 09:45 PM
