I put a new engine in my f4i its the exact same engine from a diff f4i and Im down to two connectors with 12 wires each and they're rectangle shape and grey. I dont have a headlight its just a stunt bike. Can anyone tell me what to do to get my bike to crank? I can bypass the cylinoid (sp?) and it will turn over?

 

the grey plug with 12 wires controlls head lights, turn signals, something else, and tip over sensor. But anyways without the tip over sensor plugged in or bypassed the bike wont start. So, heres what you do i have a 01 f4i so plugs should be exactly the same ok on one end (the wire all the way to the end) of the plug you have red with a white stripe next to it you have white with a black stripe. not on the other end of the plug (the wire at the very end) is green with grey on it. these three wires are for your tip over sensor, take and cut back a couple inches incase you want to wire back. Now the good stuff take red with a white stripe and green with grey on it and wire these two together now take white with a black stripe and cap it off . There you go that is how to bypass tip over sensor and your bike should start

 

the other 12 wire plug with two oranges on one side go to turn signal, horn, brights, and clutch nothing needs to be jumped on this side to make run i completely removed all my controlls

 

nicceeee directions