F4I help

Thread Tools
 
Search this Thread
 
Old Mar 12, 2010 | 03:10 PM
  #1  
DynCorp's Avatar
Thread Starter
Registered User
 
Joined: Aug 2009
Posts: 80
From: mech. md usa
DynCorp is a decent person
F4I help

i have a 2002 f4I im workin on does anyone no how to test the ignition pulse generator to tell if its good or not???? the bike is getting gas and has no spark ive checked the ignition switch, tip sensor, fuses, all wiring im not sure what else it could be other than the computer which i dont want to replace cuz it cost so much any help would be awesome thanks
Old Mar 13, 2010 | 09:37 AM
  #2  
DynCorp's Avatar
Thread Starter
Registered User
 
Joined: Aug 2009
Posts: 80
From: mech. md usa
DynCorp is a decent person
Re: F4I help

nobody??? i was reading about the cam pulse generator to would that going bad cause no spark?? and if so how could i test that?
Old Mar 19, 2010 | 10:13 AM
  #3  
F4i_stuntin_WV's Avatar
Registered User
 
Joined: Oct 2007
Posts: 89
From: Bodymore, MD
F4i_stuntin_WV is a decent person
Re: F4I help

BUMP:

I have no clue what that cam pulse generator is but yesterday I tried to start my F4i up and nothing. No fuel pump prime, no headlight, no ignition. Fuses are good just have no clue?!
Old Mar 19, 2010 | 05:31 PM
  #4  
DynCorp's Avatar
Thread Starter
Registered User
 
Joined: Aug 2009
Posts: 80
From: mech. md usa
DynCorp is a decent person
Re: F4I help

yeah i still havent figured mine out i have replaced the cam pulse generator the computer bypassed the tip sensor and still the fuel pump primes but no spark this is crazy what else could it be???????????
Old Mar 24, 2010 | 05:42 PM
  #5  
DynCorp's Avatar
Thread Starter
Registered User
 
Joined: Aug 2009
Posts: 80
From: mech. md usa
DynCorp is a decent person
Re: F4I help

bump!!!! nobody has had this problem at all??
Old Mar 26, 2010 | 04:32 AM
  #6  
f4 diablo's Avatar
FTP CYCLES
 
Joined: Oct 2008
Posts: 506
From: ft myers, fl, usa
f4 diablo is a decent person
Re: F4I help

I have not had this issue (knock on wood) but pump primes so its not tip sensor. I would firs check the plugs, then inspect wires from the spark plugs all the way to where ever they go. Then replace the plug boots cause they are the ignition coils. the see if it sparks. Then start looking at the pulse generator . P.s if you un plug the coils 1 by 1 LEAVE THE PLUGS IN an put a tester plug in sockett so as to not spray fuel out onto you plug that might spark. an if plugs out, for god sake's do not look down the hole an hit the starter.lol it hurts to have gas sprayed in you eyes.lol
Old Mar 26, 2010 | 12:30 PM
  #7  
DynCorp's Avatar
Thread Starter
Registered User
 
Joined: Aug 2009
Posts: 80
From: mech. md usa
DynCorp is a decent person
Re: F4I help

yeah i tried plugs and different ignition coils but its not getting the signal from the computer to tell it to spark and i have tried another computer from a buddies runnin bike still no fire
Old Mar 26, 2010 | 02:26 PM
  #8  
f4 diablo's Avatar
FTP CYCLES
 
Joined: Oct 2008
Posts: 506
From: ft myers, fl, usa
f4 diablo is a decent person
Re: F4I help

Originally Posted by DynCorp
yeah i tried plugs and different ignition coils but its not getting the signal from the computer to tell it to spark and i have tried another computer from a buddies runnin bike still no fire
That is odd..f4i has non adjustable timing,so I dont think thats an issue, it would probably run like *** if it jumped timing via the cam or cam chain.I am puzzled for now, I will try an look into it an let you know what I can find out.
Old Mar 26, 2010 | 03:05 PM
  #9  
DynCorp's Avatar
Thread Starter
Registered User
 
Joined: Aug 2009
Posts: 80
From: mech. md usa
DynCorp is a decent person
Re: F4I help

ok thanks im going today to get another wire harness and stator see what that does thanks for the info
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
morrow85
Bike Parts for Sale
5
Aug 25, 2013 02:59 PM
Jay Rodriguez
Bike Parts Wanted
2
Jan 27, 2013 03:13 PM




All times are GMT -4. The time now is 06:52 PM.