03cbr600rr idle
#1
what had happened was....
Thread Starter
Join Date: Sep 2009
Location: orlando fl/ san diego ca
Age: 40
Posts: 437
03cbr600rr idle
getting conflicting information thats confusing the **** outta me. what needs to be done to an 03cbr600rr to get adjustable idle? f4i idle screw? idle cable? someone clue me in please. thanks
#2
Re: 03cbr600rr idle
I need some help with this one as well! Don't you run two cables? Your stock cable (that only richens and leans out the mixture) and a second in place of the center set screw to open up the throttle bodies thus increasing idle. Without the second cable the idle will not go past 2500.
#3
Re: 03cbr600rr idle
yes run two cables. go to a honda dealership and order the idle screw cable from a 900rr or an f3 (i believe the 900rr cable is longer) remove the stopper screw in the center of the four throttle bodies and screw this one in its place, dont forget the spring that keeps the cable from vibrating out. should cost about 15 bucks.
#5
Re: 03cbr600rr idle
yes run two cables. go to a honda dealership and order the idle screw cable from a 900rr or an f3 (i believe the 900rr cable is longer) remove the stopper screw in the center of the four throttle bodies and screw this one in its place, dont forget the spring that keeps the cable from vibrating out. should cost about 15 bucks.
What year 900RR?
#7
Thread
Thread Starter
Forum
Replies
Last Post
cott03_f4i
Service, Repair, and Maintenance
1
08-24-2018 08:28 AM
Duke_Montes
Service, Repair, and Maintenance
0
07-23-2015 11:12 PM