from what i see both frames are broke and if i wanted to rebuild i dont know where to start.... any1 got any advice to help me out and what would the cost be?

http://img195.imageshack.us/gal.php?g=brkn1.jpg

 

It's a R6... It was Gaaaabbbaaaagggeee to begin with...

 

any1 with actuall helpfull advice?

 

well if the motor is still intact it might b worth unless if u take it to a shop then you will spend around 4hundred or 5 just to have theem pull the motor if this is something u gonna do at home then yes find a place to str8n the frame cost will b about 450 bucks if you do start to pull the motor get a paint pen and mark all the hoses plugs sensor or anything else you take apart it will b along time b4 u get the frame back so dont 4get to mark everything its a mission but it will b worth it when u pull up to ur local stunt spot and u can say u fixed it

 

Anything can be fixed? just depends on how much time u want to put into it. Just like the guy above me if you are gonna do it your self sure its worth it but if you have to pay some one then If you do it your self i would just try and find another frame rather then trying to straightin the old one or have it welded