bent cages??
Re: bent cages??
LOL,......I would't get discouraged dude, just go with it and see what happens! SI has a very good reputation for making killer products. Your going to break/bend/smash/crack/scrape stuff if you stunt! It's just the reality of it, if you don't want anything to happen to your bike or its components then don't stunt!


"Keep Your F4i's IDIOTS"

Joined: Apr 2007
Posts: 3,914
From: deep dirty south Illinois you fucks not missouri

cages are meant to take the beating instead of the bikes frame and motor, so this problem can be expected! yes it sucks but really all depends on the rider and the crash. i've seen all kinds of different brands of cages hold up and withstand crazy things and on the other hand i've seen all these same cages break, bend and fail at the weakest dismount gone bad

but in the end, as long as the cage saved the bike it did its job

but in the end, as long as the cage saved the bike it did its job
Re: bent cages??
cages are meant to take the beating instead of the bikes frame and motor, so this problem can be expected! yes it sucks but really all depends on the rider and the crash. i've seen all kinds of different brands of cages hold up and withstand crazy things and on the other hand i've seen all these same cages break, bend and fail at the weakest dismount gone bad

but in the end, as long as the cage saved the bike it did its job

but in the end, as long as the cage saved the bike it did its job

Re: bent cages??
but I did do this with a sick innovations.. This was WHILE the rear bar was broke.. One side was not bolted on, the left side only had the main motor mount bolt, the rear all thread was gone when this happened..
No broke stator cover! Just took out my msr ez pull
http://www.youtube.com/watch?v=DvCO7...e=channel_page
btw that is the crash that bent my cage about 8 inches out of alignment on the cross bar... about 10 minues with a cheater bar I had it back perfectly straight, and ended up selling that cage to my friend for $200 lol, he still uses it
Re: bent cages??
Maybe I don't..
but I did do this with a sick innovations.. This was WHILE the rear bar was broke.. One side was not bolted on, the left side only had the main motor mount bolt, the rear all thread was gone when this happened..
No broke stator cover! Just took out my msr ez pull
http://www.youtube.com/watch?v=DvCO7...e=channel_page
btw that is the crash that bent my cage about 8 inches out of alignment on the cross bar... about 10 minues with a cheater bar I had it back perfectly straight, and ended up selling that cage to my friend for $200 lol, he still uses it
but I did do this with a sick innovations.. This was WHILE the rear bar was broke.. One side was not bolted on, the left side only had the main motor mount bolt, the rear all thread was gone when this happened..
No broke stator cover! Just took out my msr ez pull
http://www.youtube.com/watch?v=DvCO7...e=channel_page
btw that is the crash that bent my cage about 8 inches out of alignment on the cross bar... about 10 minues with a cheater bar I had it back perfectly straight, and ended up selling that cage to my friend for $200 lol, he still uses it
Re: bent cages??
Maybe I don't..
but I did do this with a sick innovations.. This was WHILE the rear bar was broke.. One side was not bolted on, the left side only had the main motor mount bolt, the rear all thread was gone when this happened..
No broke stator cover! Just took out my msr ez pull
http://www.youtube.com/watch?v=DvCO7...e=channel_page
btw that is the crash that bent my cage about 8 inches out of alignment on the cross bar... about 10 minues with a cheater bar I had it back perfectly straight, and ended up selling that cage to my friend for $200 lol, he still uses it
but I did do this with a sick innovations.. This was WHILE the rear bar was broke.. One side was not bolted on, the left side only had the main motor mount bolt, the rear all thread was gone when this happened..
No broke stator cover! Just took out my msr ez pull
http://www.youtube.com/watch?v=DvCO7...e=channel_page
btw that is the crash that bent my cage about 8 inches out of alignment on the cross bar... about 10 minues with a cheater bar I had it back perfectly straight, and ended up selling that cage to my friend for $200 lol, he still uses it

but good work...yea that pole looked a lil hairy... Re: bent cages??
Maybe I don't..
but I did do this with a sick innovations.. This was WHILE the rear bar was broke.. One side was not bolted on, the left side only had the main motor mount bolt, the rear all thread was gone when this happened..
No broke stator cover! Just took out my msr ez pull
http://www.youtube.com/watch?v=DvCO7...e=channel_page
btw that is the crash that bent my cage about 8 inches out of alignment on the cross bar... about 10 minues with a cheater bar I had it back perfectly straight, and ended up selling that cage to my friend for $200 lol, he still uses it
but I did do this with a sick innovations.. This was WHILE the rear bar was broke.. One side was not bolted on, the left side only had the main motor mount bolt, the rear all thread was gone when this happened..
No broke stator cover! Just took out my msr ez pull
http://www.youtube.com/watch?v=DvCO7...e=channel_page
btw that is the crash that bent my cage about 8 inches out of alignment on the cross bar... about 10 minues with a cheater bar I had it back perfectly straight, and ended up selling that cage to my friend for $200 lol, he still uses it
that how you treat a f4i, they like it.
Re: bent cages??
that was LITERALLY the FIRST wheelie of the day..
And as I left my house, I told my friend "I can't wreck today, my cage isn't bolted on right"

I was leaning too far left, had to come off the brake to lean more to avoid the pole, and then looped so I just jumped lol
stupid mistake
Re: bent cages??
ya
that was LITERALLY the FIRST wheelie of the day..
And as I left my house, I told my friend "I can't wreck today, my cage isn't bolted on right"
I was leaning too far left, had to come off the brake to lean more to avoid the pole, and then looped so I just jumped lol
stupid mistake
that was LITERALLY the FIRST wheelie of the day..
And as I left my house, I told my friend "I can't wreck today, my cage isn't bolted on right"

I was leaning too far left, had to come off the brake to lean more to avoid the pole, and then looped so I just jumped lol
stupid mistake

Thread
Thread Starter
Forum
Replies
Last Post
SKATE215
Bike Parts for Sale
0
Jan 8, 2013 01:36 PM







